So, i replaced my brake pads on Mr.1827
Drove it around for a few days.
Looked at my rotors and noticed that only half of the rotor was wore down ( inner ) as the other half was turning yellow orange ( outter )
Rechecked the bolts, good
Rechecked the M spring, good
Rechecked the rubber where the top bolt goes into, good
Am i missing something?
Everything is tight. Brake pedal isnt as hard as it should be with new pads. But fairly stiff
Drove it around for a few days.
Looked at my rotors and noticed that only half of the rotor was wore down ( inner ) as the other half was turning yellow orange ( outter )
Rechecked the bolts, good
Rechecked the M spring, good
Rechecked the rubber where the top bolt goes into, good
Am i missing something?
Everything is tight. Brake pedal isnt as hard as it should be with new pads. But fairly stiff
Last edited: