littlemimus
fear the mighty sandvich!
- :
- Mazdaspeed protege 2003
i have a lip..... just not the 3.5 i was under the impression he was saying for those without lips not the regular 2003 lip it would fit
We wont really do much until we have the six deposits. We will get feedback at that time and make any reasonable alterations to the design. Two in and four to go.....
so i guess my idea for a cad drawing or something is out
so i guess my idea for a cad drawing or something is out
So who has sent there deposit so far?...
1- MSP03.5- deposit sent.(carbon fiber)
2- Sandspeed (carbon fiber)
3-
4-
5-
6-
We have been designing and exploring the various options regarding this project for the last couple days. Thank you all for the feedback (both informative and critical). We feel we have enough interest to continue, but we will wait until we have the vehicle here at our shop before we put the finishing touches on the final design and drawings for any and all of your feedback. We have decided we will sell the first ten for no more than $550.00. Depending on the final design, it might even be a little less. If you want it in fiberglass it will be less (but you will have to paint it). We are excited about starting this project and hope you will be satisfied with the results. We are still hoping we can produce a part that will accomodate both the ones with lips and ones without. Please do not attempt to send a deposit untill everything is finalized. Thanks, Bob and Bryan
After spending time looking at the undercarriage and taking measurements we have decided to do a four fin center diffuser. We are in the process of doing a detailed drawing, but ours would look like the apr one for the S2000. it will be a 4 fin design that is in the center only.
it will look like this:
The APR one goes for $735 for carbon and $520 for fiberglass.
We will do $475 for carbon fiber and $375 for fiberglass for the first 10 we send out.
Once we get a 15% deposit from 6 people we will start the mold.