For Sale / Classifieds

I had a 2019 CX-9 and had to sell it to get a 2021 truck. I bought this as a set to swap out every winter season for snowboarding but they have been sitting in my garage since I don't have the CX-9 anymore. Set of 4 Mounted and Balanced Winter Tires And Wheels 255/60R-18 YOKOHAMA ICEGUARD G075 XL TIRES (REG PRICE $188 each) 18X8 SPORT TUNING AT2 MT GREY Wheels (REG PRICE $201 each) With tire pressure sensors (TPS) 315MHZ TIRE PRESSURE SENSOR (4) - $55 each All for $1100, originally paid $1600 Located near Baltimore MD / Washington DC.

Looking to sell my 03 speed protege very sad... clutch went on it and with further investigation before putting a new one in realized the pinch weld along the passenger side under the ground effects was all rotted out. it is a typical new york rust bucket unfortunately previous owners did not take care of her well. So i am looking to just unload this car for a parts car as i don't have the time or really want to deal with parting it out, but will if it comes down to it.. Looking to get 2500$ obo and you must pick it up. I am located in Syracuse, NY. could deliver within reasonable distance and for a fee. (Don't contact me for parts i am not parting it out as of right now.) Motor (152,000 miles) and Turbo are good. EXTRAS... POPE...

Putting up my KL swapped Protege5 for sale. I have a build thread chronicling the swap itself here: https://mazdas247.com/forum/t/kl-swappin-protege5.123871539/ Car and I am located in the Detroit Metro area in Michigan. I bought this car after writing my last (second) Protege5 off in KY in July 2019. The car was previously in a front end accident, but this hasn't affected the alignment. I pulled my core support and crash bar off my old Pro5 and intend on that going with the car. The paint isn't in great shape; it's been resprayed, but mechanically it's sorted. I have swapped over the following parts from my second Protege5: Suspension: -Tokico Illumina struts/ Eibach Sport Springs -AWR 21mm RSB with adjustable endlinks, new rod ends...

I recently traded in my 2019 CX-5 turbo 😢 and reinstalled the factory intake before. I had this CorkSport short ram intake installed for just a few months and am looking to sell for $125 plus shipping. I am in the Chicago area, and can meet up instead of shipping.

This motor and automatic trans comes out of a 2018 Mazda 6 with only 1,400 miles! If you have a 2014-2018 Mazda 3 or 6 and are looking to throw boost at it and want a spare to build, or would like a better transmission (Mazda 6 has better gearing than the 3 transmission), and want a low-mile package deal then you found it. These motors typically sell for 2-3K just for the motor alone, with 60-100K on average from junkyards. This example has only 1,400 miles and comes with a transmission as well, which typically sells for 700-100 for the Mazda 6 trans in good condition. DM me for more details if serious, I have VIN and can ship out with great cheap rates. $3,500 located in Addison, IL

Purchased from tire rack and used less than 2 months (less than 1000 miles) on my 2019 CX5 2.5T. The handling was great but the ride was a bit stiff for having my toddler in the back. Selling for $425 combined (or separately $300 for struts and $150 for springs). Bilstein Part # Front left: 22-291240 Front right: 22-291257 Rear: 24-291231 H&R Part # 28875-3

It includes the OBD connection cable and tune MX-5 ND 2.0. Everything in good shape. $400

Selling a pair/of used H&R 4065673 aluminum hub centric 67.1 bore 20mm spacers. They fit any Mazda with hub bore of 67.1 Bolt Pattern: 5/114.3 Center Bore: 67.1 Bolt or Stud: Stud Thread Type: 12x1.5 They rode smooth on the car with no vibrations. All short original nuts and studs included as in the picture. Asking $60 obo plus shipping from 77459

Turned our 2020 CX-5 lease in early for a 2023 CX-50, so no longer have a need for these. They should fit MY 2017 thru 2021 and the part# is 00008BR21. They are dirty, but isn't that their job? Looking for $50 +shipping in CONUS or $50 picked up in the Lehigh Valley PA area.

Got a few old parts kicking around from my long-sold 2003 Protege5 that I never installed. A power steering pump bought online from a wrecking site and an evaporation canister (and line/filter?) that I picked up somewhere. Getting rid of everything for free, you just pay shipping or pick-up (I'm in central Los Angeles.) Would love to find someone to take it all off my hands so it doesn't go in the dumpster and in landfill. (Forgive the lack of a sign in my pics--I forgot to throw one in, but can repost if necessary.) Thanks!

Car has approx. 50,000 original miles. The motor is rebuilt with billet rods, new motor mounts. I don't have time to complete the car. It will probably take a weekend to complete. Needs the remote oil filter, hoses and regulator installed, cylinder head and wiring, etc. Car is in very good condition. $5,000.

As stated; 2003.5 MSP shock/lowering spring combo. Can't remember specific brand, possibly Eibach. ~2" lower front and 1.5" rear iirc. Sorry picture taken last week and just now got to it :p 100$ PLUS shipping; likely about 30-50$. Reply or PM! Thanks and best regards

Got rid of my p5 finally, 😢, and here are a few bits I kept to sell off here. I do not have any values in mind really so just toss out what you want and we can very likely work something out. DaveB gauge ring 'clones'. A long while back someone on the forum was making these replicas and I got a set. They really make the instrument cluster look nicer. Intermittent wiper stalk out of a Ford Escape I believe. I cannot recall exactly what car I got this out of but it is plug and play. Thule fit kit for standard feet and square bars.

Lookin to sell my stash of critical maintenance items at half of my costs, these should be much higher now. Prefer local (Vancouver WA or Portland OR or any vicinity) deal, willing to meet you at half way up to 100miles. If you would drive 100 miles, I'll drive the same distance. *1ea ATF Filter *1ea Air Filter *1ea Cabin Air Filter *15ea Oil Filters (proper filter for 2.5 Turbo engines) Reason for sale - switching to Electric Asking Price is $100 for all, not including shipping cost. Price is firm if you buy the whole deal

Selling my jb4 tuner with bluetooth adapter as well as my corksport sri. Currently the jb4 is going for $678. Im looking to get $550 shipped The SRI is going for $229, im looking to get $175 shipped. I would do $700 shipped for both. Message me if interested!!

Up for sale is a pair of new OEM Mazda front struts (new seats, dust boots, bearings, mounts, nuts and cap) with Eibach Pro Kit springs loaded and Rear Pro Kit Springs. The endlinks pictured are already sold. $400 OBO. Will ship depending on location.

Asking for $100. Selling this framed Auto dimming mirror because I replaced it with a frameless one. It's in great condition, works great. Not seen in the pictures but it also comes with the screw to mount it to the windshield. The connector it has can be seen in the pictures. It has a long neck so it's compatible with the lane keep system. I am located in Montreal, but I am willing to ship it anywhere in Canada/US (shipping cost would be covered by the buyer)

My miata got totalled in an accident on October 15th. The only damage done do it was the front end that got torn apart, and the back window to the convertible top blew out. A week prior before the accident I had replaced the clutch, clutch master, and drive shaft. Original wheels but the tires are about 1 1/2 years old. I’m looking to see if anyone is interested in buying the car for parts considering the clutch and driveshaft are brand new.

.

I have a clean set of J-Spec headlights complete with all bulbs, sockets, rubber, etc... I am asking $275 + Shipping O.B.O. for them. I will include the 6000K HIDs that are in them right now. Up next is a set of stock tails that are custom painted, includes all bulbs, sockets and harnesses. $60 + shipping O.B.O.