HOW TO reaim your headlights. this is for the gt with the hid headlights.
The Problem is the hid are aimed too low for normal driving not being able to see down the road and not seeing road signs till your right ontop of them. I have ran through a stop sign beacuse of this.
DISCLAIMER i am taking no responcability for anything you do to your car this is only to show my solution to said problem.
SOLUTION first i had to wait till it was dark enough to see my headlights but bright enough to see under the hood. i wish i had a garage. need car parked in front of wall 4-6 ft away the more distance you can get the more accurate it will be.
second with lights on and the roller level set to 0 i marked the top of where the light was on the wall with some tape.
third turn the roller to the 1 setting. you want to turn the white plastic screw at the back of each light counter-clockwise until you bring the light level back to the tape mark on the wall. its that white screw behind the orange connector its a pillips head #2
enjoy
i wouldnt recomend adjusting any larger then 1 setting. when ever you use your high beams turn your knob back to 1 that way you can see farther. with oncomeing traffic try and use the 1 setting that way your not blinding me when your comeing down the road.
The Problem is the hid are aimed too low for normal driving not being able to see down the road and not seeing road signs till your right ontop of them. I have ran through a stop sign beacuse of this.
DISCLAIMER i am taking no responcability for anything you do to your car this is only to show my solution to said problem.
SOLUTION first i had to wait till it was dark enough to see my headlights but bright enough to see under the hood. i wish i had a garage. need car parked in front of wall 4-6 ft away the more distance you can get the more accurate it will be.
second with lights on and the roller level set to 0 i marked the top of where the light was on the wall with some tape.
third turn the roller to the 1 setting. you want to turn the white plastic screw at the back of each light counter-clockwise until you bring the light level back to the tape mark on the wall. its that white screw behind the orange connector its a pillips head #2
enjoy
i wouldnt recomend adjusting any larger then 1 setting. when ever you use your high beams turn your knob back to 1 that way you can see farther. with oncomeing traffic try and use the 1 setting that way your not blinding me when your comeing down the road.
Attachments
Last edited: