What diameter is the Stock K04 Intake Side??

[bigdaddy]

Hey guys,

So I just need to know what the diameter of the intake side of the stock K04...
thanks!

 

[bigdaddy]

srsly??? Guys, c'mon. Someone has to know...

 

[krnage]

im pretty sure its 2", as I have a 2" to 2.5" reducer on my TIP...............if I have the ride end your talking about

 

[vrspeedemon]

Yes....2" to 2.5" per my TIP as well.

 

[bigdaddy]

Yes....2" to 2.5" per my TIP as well.

yeah, so the TIP goes 2.5" -2"

 

[bykeryder4life]

yup. the k04 inlet is 2"

 

[MSMS3]

yup. the k04 inlet is 2"

Outside diameter or inside diameter?

 

[Darth Vader]

Knowing the diameter of the inlet hole tells virtually nothing about the turbo. Are you asking for major diameter or minor diameter (often termed inducer and exducer), a/r (area radius or housing sizing)? Are you trying to figure the pressure ratio? What do you want to know?

 

[MSMS3]

+1. Are you just simply trying to find out what size TIP you need, or are you trying to calculate flow characteristics within the turbo's compressor side? Big difference.

 

[bigdaddy]

just trying to get the fitment correct for a TIP. I have one that Im planning on selling, and it didn't come with a reducer, so I had to go buy one.

 

[bykeryder4life]

Outside diameter or inside diameter?

outside. like where a coupler would slide onto the inlet of the turbo to connect to the intake