oil blow by after turbo reinstall?

[pbarton14]

Im having a small amount of oil blow by while im in boost but no blow by in vacuum. I just replaced the exhaust side of my turbo housing due to the other one having 2 bolts broke in it causing a exhast leak. this happened once before and it ended up being the oil feed line not being tight enough . Any ideas?

 

[pbarton14]

i looked under my car and seen oil dripping in my CS 3 inch dowpipe, oil is coming from the oil drain line on the turbo, i guess it blows by when the turbo is working hard?

 

[kamon8404]

Did you replace the washer on the banjo fitting on the line? You should probably just replace that or make sure the line is tight.

 

[pbarton14]

I will have to look at it , I confirmed that it's not blow by, its squirting onto the downpipe only when I stay in boost for over 5 seconds

 

[pbarton14]

it was simply the oil drain on the turbo was not tight enough, all is good now