Steelwagon6
Blake Reeves
2004 Mazda 6s Wagon
Wheel/Brake Setup:
Custom Candy Teal Plastidipped MSR 088 wheels - 19x8.5 +24
NeoChrome Lug Nuts
EBC Ultimax Front/Rear Rotors
Hawk HPS Front/Rear Pads
StopTech SS Front/Rear Brake Lines
Custom Blazing Copper Painted Calipers
Suspension:
KSport Coilovers
SPC Adjustable Front Ball Joints
AWR Adjustable Endlinks
GT-Spec Replica Strut Tower Bar
KYB Rear Shocks
Engine:
Injen Super SES Cat-Back Exhaust (custom welded for the wagon)
Injen SP Cold Air Intake
AWR Wishbone Engine Mount
Denso Iridium Spark Plugs
Throttle Body Ground
JNA Air Diversion Panel
NeoChrome accents
Exterior:
VIS Monster CF Hood
Retrofitted '05 WRX STI Chargespeed Lip
Retrofitted Lexus IS350 Side Lips
Smoked LED rear reflectors
LED License Plate Lamps
Mazdaspeed Stubby Antenna
Plastidipped Emblems
Plastidipped Sports Grill
Custom License-Plate Relocate
Mesh Bumper Grille
Smoked Side Markers
DDM 6000K HID Kit
Xenon Super White Reverse Lamp Bulbs
Xenon Super White High Beam Bulbs
55W Xenon Fog Lamp Bulbs
06 Tinted Chrome Tail Lamps
Interior:
Corksport LED Conversion
Infinity 12" Sub
Alpine 700W Amp
Grom iPod Link
Custom gooseneck iPhone holder
--------------------------------------
Rar40941
Reg Rivera
Mazda Protege5
engine:
-Injen cold air intake*
-hks hi-power axle back*
-resonator delete*
-Samco radiator hose kit
-all 4 AWR engine mount 95 durometer
-painted valve cover*
-Ngk speak plugs And wires*
- Cruise control delete*
- windshield wiper fluid delete*
-corksport brass shifter bushings*
-CORKSPORT Shifter Bushings For Protege
- goodridge clutch line
- exedy racing stage one clutch*
-Fidanza Flywheel 7.5lb MSP
-.71 5th Gear Set MSP
-Mfactory LSD MSP
-LSD install kit*
-signature sounds coolant Reservoir*
-Air Diversion Panel from CR3 Motorsports*
-A/C delete*
-power steering delete*
- mini wire tuck*
-windshield wiper motor delete*
interior:
-rockford fosgate prime 6x8*
-330.3 viper alarm
-protege garage adjustable*Short throw shifter
-auto power roll bar*
-F1 spec raceing seats
- sparco sliders, wedge engineering brackets*
-pioneer deck*
-white LEDs*
-no back seats*
-gt spec rear trunk brace*
- nrg quick release and hub adaptor fromslammedenuff.com*
-takata rep. 4 point racing harnesses*
- limited do work son grip royal wheel stripped and paint to match cage
suspension:*
- BC BR coilovers shortened 2 inchs struts and springs with 600 front spring rate and 900 rear.
-ksport rear camber plates*
-awr endlinks front*
-*AAC rear lateral link kit
- race beat rear sway bar*
- gt spec rear trunk brace*
-Kmr Rear V Brace
-Kmr Rear Link Reinforcement Panel
- Pedders Front Control Arm Bushings Protege
- gt spec front strut bar*
exterior:*
-badge delete*
-racing direction 17x11 -11 offset rebuilt by memoryfab*
-toyo proves t1-s*
-blacked housed headlights*
-fog light delete*
-5k hids low beam*
-yellow high beams
-dgm front lip
-spray painted calipers
-bumper latches*
-custom fiber glass fender flares
-shorty antenna
-jdm tail lights*
-roof rack delete
-trim delete
-wink mirror*
-panted rear defuser*
-amber lisence plate lights*
- windshield wiper motor delete*
- rear wiper delete*
--------------------------------------
Rightfullrudder
Ben Zalutsky
2009 Mazda6 3.7L Sport
Mods:
- D2 Racing RS coilovers, rear collars removed, bumpstops removed
- Injen intake set as CAI with hydroshield on filter
- Borla Pro XS mufflers attached to custom Y-pipe with resonator delete
- AME Shallen CX 19x9 +20 19x10 +25 with 225/35 and 225/40 tires
- Homemade front lip
- Fenders pulled to oblivion, no front splash guards
--------------------------------------
Hyperion
Josh
2010 Mazda3 GX
Mod list
**Exterior**
Custom Audi Style LED Headlights w/ red projector accent leds.
Nextmod Eyelids
RHO Plate
OEM Sideskirts
OEM Rainguard
OEM Rear lip spoiler
OEM Foglights
6000k HID Low Beam
Black Emblems
Blacked Out Tail Lights
Blacked Out Side Markers
Matte Black Vinyl Roof
Red Calipers
Red forward facing Hella Horns
Rolled & Pulled Rear Fenders
MZ Front Lip
**Wheels/Suspension**
Black & Grey Camoflage Hydrodipped
-XXR 530 18x8.75 +30mm
-XXR 530 18x9.75 +15mm (Corrected)
AirRex Front Struts
Airlift Shocks
AirRex Extended Sleeves
VIAIR 440C Compressor
Air Lift V2 Management System
Metallic Apple Red 5 Gallon Air Tank
Falken FK-453 215/35/18
Nankang NS2 215/40/18
Dominant Engineering Adjustable Camber Arms (-7 Camber)
**Interior**
Black & Grey Camo Hydrodipped
-Door Handles
-A|B|C Pillars
-Interior Trim
Suede Door Cards
Suede Arm Rests
Suede Dash
Red Stitch leather boot
Weathertech Mats
Red Footwell Lights
Black Sun Visors
Corksport LED Interior Lights
Custom Trunk Lighting
Custom Suede Trunk Floor
**ICE**
OEM Style Double Din w/ Navigation & Rearview Camera
JL TR650-CSi 2x Tweeter, 2x Woofer
JL TR570-CXi 2x Coaxial Speakers
JL JX360W 4 Channel Amp
JL JX500/1D Monoblock Amp
JL 12W0V3 Subwoofer
Ported Bassworx Box
Viper 5906 Two Way Security System
**Engine**
Custom Tune
AFR tuned for 12.9-13.2
VVT cam table advanced
Ignition tables completely tuned for 91 octane
RPM limiter adjusted
Speed limiter adjusted
Linear throttle maps.
Metal Shifter Bushings
Vibrant 4-2-1 Catless Headers
Corksport Cat Back Exhaust
Corksport High Flow Cat
Corksport Urethane Exhaust Hangers
Corksport 75 Duro Rear Motor Mount
Ractive SRI
NGK Primary O2 Sensor
NGK Secondary O2 Sensor
--------------------------------------
ffocused.
Alex Perrucci
2002 Sunlight Silver Protege ES
Suspension/Wheels:
Ksport Coilovers
AAC Adjustable Endlinks
Rotiform NUE 17x8 +20F/+30R 205/40/17 Ohtsu FP7000
OZ Racing Monte Carlo 17x8 +37 205/40/17 Falken 912
ARP Exteneded studs (front)
Motorsport Tech 10mm hubcentric spacers (front)
Exterior:
OEM Sedan lip
OEM Side Skirts
EGR Rear Window Visor
03.5 Mazdaspeed Protege wing
03.5 Mazdaspeed Protege muffler
Black housing headlights
All red tails
Yellow lamin-x fogs
Engine:
Injen CAI
1.8 Coils/Wires
MSM Oil Cap
AWR 88 duro front motor mount
Interior:
CF Gauge bezel
Polished Dave B rings
MOMO e-brake handle
Color matched trim
--------------------------------------
thelowerclass
Shea McGlone
2010 Mazda 3 GT
Wheels & Suspension
18x9.5 +32 (corrected) Work Meister S1R w/ 215/35R18 Falken FK453
18x10.5 -3 (corrected) Work Meister S1R w/ 225/40R18 Falken FK453
KW V2 Coilovers (minus helper springs)
Corksport Prototype Camber Plates
Dominant Engineering Camber Arms
Racing Beat Rear Sway Bar
Bodywork
Rolled and Pulled fenders (front and back)
Shaved bumper tabs
Nextmod GV Replica front lip
Nextmod Mz Replica rear lip kit
OEM Replica side skirt (OEM blew off driving through North Dakota)
GV Eyelids
VHT Nightshade Red tails
Lamin-x Fogs
Red Painted calipers
Performance
Mazdaspeed 3 OEM CBE, custom straight pipe exhaust
Ractive SRI
--------------------------------------
Kulluminati777
Arnold D
1993 MX-3
AERO PARTS/VISUAL
+Full Authentic A-spec touring kit from japan.
-Mazdaspeed wing
-Mazdaspeed side skirts
-Mazdaspeed front nose with lip
+Acura RSX type S rear Under-spoiler
+Advan Carbon OEM style Carbon fiber hood
+Yachant Carbon fiber moonroof
+4300K HIDs
+Tuned by mazdaspeed sports factory badge on the rear.
+Mazdaspeed white bonnet badge (Type B) hood
+Rare OEM plastic headlight covers
INTERIOR
+MX-3 stamped Aluminum pedals
+MX-3 stamped scuff plates
+Carbon Fiber dash bezel with chrome speedometer rings
+Mazdaspeed Carbon look shift knob
+Mazdaspeed B-Spec steering wheel with carbon look ring and Mazdaspeed horn pad
+Mazdaspeed Black Sport seats
+Custom acid etched Mazdaspeed rear view mirror
+Double din Pioneer deck
+Chrome 626 door handles with carbon look door cups
Powerplant
+Naturally aspirated 2.5L KLZE
+Silla Aluminum Radiator
+Outlaw Intake manifold and throttle body thermoblock spacers
+Hoodzy's Cold Air Intake
+MSD Blaster 3 external coil
+NGK plug wires
+Pertronix Flame Thrower HEI module
+Fidanza Aluminum Flywheel
+Mazdaspeed Limited slip differential
+Corksport Stainless steel clutch line
+AWR Engine mounts Front and Rear
+Mazdaspeed oil cap
+Mishimoto Oil catch can
+Mazdaspeed Exhaust
Suspension/Brakes/Wheels
+Mazdaspeed MS-01 wheels
+25mm Ichiba wheel spacers on front and rear
+Ceika 6 pot calipers, 11.5" slotted rotor, and stainless steel lines
+SRD aluminum front cross member
+SRD aluminum rear tie bar
+Mazdaspeed front strut bar
+Corksport Type I rear strut bar
+Traction Bar on Lower control arms
+K-sport Coilovers
+Mazdaspeed Front Swaybar
+Mazdaspeed Rear Swaybar
+ZX2 trailing arms
--------------------------------------
MM BOOST
Kevin Jenkins
2007 Mazdaspeed 3 GT
Exterior
-OEM Mazda upgrade fender flares (made for Mazda 3) color matched Cosmic Blue
-Wing lip extension
-LED Smoked Tail Lights
-Color matched Cosmic Blue headlights with TRS lenses and 6k HIDs (DDM Tuning)
-3k HID fog lights (DDM Tuning)
-black led side markers with black surrounds
-STi V-limited Front Lip
-JDM V2 side skirts
-Nextmod Gen2 Speed 3 rear lips
-DG Racing Rear Diffuser
-blacked out reflectors
-blacked out upper and lower front grills
-blacked out front and rear Mazda emblems
-carbon fiber rear Mazda emblem inserts
-debadged and side moldings removed
-sickspeed quick releases
-sickspeed rear tow strap
-VG Shark Fin Antenna
-Mugen-style Window Visors
-35% tint
-Lamin-X Ice Blue fog light covers
-CP-e Tow Hook License plate relocation
-LED rear license plate lights
-LED reverse lights
Suspension/Brakes/Wheels
-BC Coilovers - maxed front, maxed rear with no collars - maxed front camber with dremeled shock towers
-SPT rear camber arms - maxed
-Progress Rear Sway bar
-SURE Front Polyurethane sway bar bushings
-StopTech rotors with Hawk HPS pads
-18x9" +25 Wedssports SA60M with carbon fiber caps
-Yokohoma Envigor 225/40/18
-Muteki Burning Blue lugs
-Endless matched valve stem caps
-fenders pulled heavily
Performance/Under the hood
-Turbo XS Front Mount Intercooler
-DNP V3 Exhaust Manifold
-Turbo XS Downpipe
-Turbo XS Race pipe
-Greddy Ti-C catback exhaust
-JBR Stage 2 Intake with inlet
-Tial QR / CP-e Blow-off valve kit
-Autotech CDFP internals
-Cobb AP V3
-JBR EGR delete
-Mishimoto Oil Catch Can
-CP-e Rear Motor Mount
-Street Unit billet blue caps
-PartPlazda carbon fiber hood lifts
-Corksport LED underhood kit with custom quick-release switch for shows
-JBR aluminum battery and fuse box covers
-Custom powdercoated parts - Wet White and Candy Blue Metallic
Interior/Trunk
-Redline Goods OEM Matched Black/Red stiching Short-shift, E-brake, and Arm Rest Cover boots
-TWM Short Shifter
-TWM Shifter bushings
-Sickspeed Cobra shift boot retainer
-Sickspeed White Old School shift knob
-Autometer Boost Gauge with red led swap to match interior mounted in cup on steering column
-Gloss White Mazdaspeed emblem on dash trim
-Corksport LED Interior swap
-NRG Powdercoated white harness bar
-NRG 5-point harnesses
-Zenclosures Mazda 3 custom sub enclosure
-Polk Audio sub grill painted gloss white
-Pioneer 12" sub
-Sony Xplode AMP
-Custom built "Iron Wood" trunk floor with hand polished handle/lift lever and Paul Walker tribute in middle of floor
-Custom hand-painted hatch cover with the word "KOVERT" - following an industrial-type theme with Iron Crosses and skulls
-LED strip custom wired/soldered to work in place of factory hatch light hidden in trunk floor to light up trunk