R Russm Member : 08 MS3 Jul 2, 2012 #1 Does anyone know if there is some kinda o Ring were the oil dip stick holder goes into the engine block on a MS3. I noticed I was getting a very little oil weeping from around that area last time I changed oil.84K Thank You
Does anyone know if there is some kinda o Ring were the oil dip stick holder goes into the engine block on a MS3. I noticed I was getting a very little oil weeping from around that area last time I changed oil.84K Thank You
rsvinylgraphics 2008.5 MGM MS3 Contributor : 2008.5 MS3 Jul 2, 2012 #2 Yes there should be a small black o-ring at the top of the dipstick near the handle
R Russm Member : 08 MS3 Jul 2, 2012 #3 Checked that one seems fine, looks like it is comeing out were tube goes into engine block below.
C chief_wiggum Member : 2008.5 Mazdaspeed3-2010 Mazda5 GT Jul 3, 2012 #5 Russm said: Any ideas? Click to expand... Check here; http://www.jimellismazdaparts.com/showAssembly.aspx?ukey_product=1889383&ukey_assembly=297661 looks like there is an o-ring where the dipstick tube mates with the oil pan/block. 133402 TUBE, CONNECTING AN (L3K9-10-407) (Required: 001) or 10460J RING, 'O '
Russm said: Any ideas? Click to expand... Check here; http://www.jimellismazdaparts.com/showAssembly.aspx?ukey_product=1889383&ukey_assembly=297661 looks like there is an o-ring where the dipstick tube mates with the oil pan/block. 133402 TUBE, CONNECTING AN (L3K9-10-407) (Required: 001) or 10460J RING, 'O '
R Russm Member : 08 MS3 Jul 5, 2012 #6 That is GREAT, Thanks so much, I wasn't sure how it was going to come out!!!