Mental Addiction
Banned
Mental Addiction is proud to announce the release of the Mazda FS-DE 2.0L H-beam rod.Designed to withstand 500-600HP and forged from 4340 forged steel the H- beam rod is a must for any serious builder looking to make power.
The group purchase details are as followed.
April 28-May 31th the Mazda H-beam rods at a deep GP price.
You have a few different options.
Stock length 5.315
H-beam with ARP 8740 (190,000 PSI tensile) rod bolts $425 (Retail $575)
H-beam with ARP2000 rod bolts(225,000 PSI tensile)rod bolts $475 (Retail $625)
Long rod 5.400
H-beam with ARP 8740 (190,000 PSI tensile) rod bolts $425 (Retail $575)
H-beam with ARP2000 rod bolts(225,000 PSI tensile)rod bolts $475 (Retail $625)
These will NOT work with stock pistons.Stock pistons use a pressed pin setup.Aftermarket rod and piston manufactors use a much better setup called full floating pin.If you feel you need to run a stock cast piston for some reason, then you will need to machine the piston to a floating wrist pin to work.
To place you order, please call 480-203-7038
Once the Group Purchase is over all orders will be processed and their will be a 3-4 week wait on rods.If you have any questions, please feel free to post here or give us a call.Please take advantage of this one time only deep discount.These prices will never happen again.
If you do not understand the differences between the long rod and stock rod setup, please read Rod/Stroke http://www.**************************.com/forums/forumdisplay.php?f=19
Click here for the official group buy thread.
The group purchase details are as followed.
April 28-May 31th the Mazda H-beam rods at a deep GP price.
You have a few different options.
Stock length 5.315
H-beam with ARP 8740 (190,000 PSI tensile) rod bolts $425 (Retail $575)
H-beam with ARP2000 rod bolts(225,000 PSI tensile)rod bolts $475 (Retail $625)
Long rod 5.400
H-beam with ARP 8740 (190,000 PSI tensile) rod bolts $425 (Retail $575)
H-beam with ARP2000 rod bolts(225,000 PSI tensile)rod bolts $475 (Retail $625)
These will NOT work with stock pistons.Stock pistons use a pressed pin setup.Aftermarket rod and piston manufactors use a much better setup called full floating pin.If you feel you need to run a stock cast piston for some reason, then you will need to machine the piston to a floating wrist pin to work.
To place you order, please call 480-203-7038
Once the Group Purchase is over all orders will be processed and their will be a 3-4 week wait on rods.If you have any questions, please feel free to post here or give us a call.Please take advantage of this one time only deep discount.These prices will never happen again.
If you do not understand the differences between the long rod and stock rod setup, please read Rod/Stroke http://www.**************************.com/forums/forumdisplay.php?f=19
Click here for the official group buy thread.
