Forge BPV with no gasket

[lavoiespeed3]

I received my Forge BPV Gen1 with no gasket can I installed this PBV like this or I need to order gasket.

 

[madvillian]

email forge, they will send you a s*** load at no cost. just tell them what kind of car and valve you have. i have a bunch laying around somewhere, but i couldn't find them last time i looked. dont even bother installing it without the gasket, you will have a massive boost leak.

 

[lavoiespeed3]

It's not Forge. I will receive the gasket this week I emailed the seller.
But somebodies said they installed the forge with no gasket and no issue since 2 years?

 

[H3br3w_Ham3r]

I didn't even know there was supposed to be a gasket?!?! I had mine installed for a year plus and had no issues.

 

[lavoiespeed3]

I didn't even know there was supposed to be a gasket?!?! I had mine installed for a year plus and had no issues.

Like many user...

 

[PaPaSpeed]

I didn't even know there was supposed to be a gasket?!?! I had mine installed for a year plus and had no issues.

There's no gasket on my cold pipe connection, but there is an "O" ring that makes the seal.

 

[lavoiespeed3]

Yes it's the O-Ring on the BPV not a gasket on Cold Pipe Connection

 

[PaPaSpeed]

Yes it's the O-Ring on the BPV not a gasket on Cold Pipe Connection

Are you saying that your O-ring is missing?
If so order the kit for FMDVMAZ3
Here http://www.forgemotorsport.com/content.asp?inc=product&cat=0007&product=FMDVSK

 

[patty AT forge]

Are you saying that your O-ring is missing?
If so order the kit for FMDVMAZ3
Here http://www.forgemotorsport.com/content.asp?inc=product&cat=0007&product=FMDVSK

That kit doesn't include the flange to intercooler o-ring. Drop me an email or PM with your address and I'll send you one in the mail.

 

[flyrevs]

you need o-ring or bad boost leak, you can also use cork gasket material and make your own, I did this and it worked great.