Can't wait to get off work today to finish it up. I got the latches in place. It just didn't line up with the pins. I'm just gonna widen the holes in the radiator support so I can adjust the pins a little. Should work out I hope.
@Joka1
I did this to my Gemini RC hood. On the divers side you still have to make a big hole on the bottom because the latches are too deep and hit the skeleton under the hood. Not really a big hole. More like a slit.
I made my holes bigger as well and used large washers to cover it up (as seen in above pictures). It works well and is defiently secure.
Rob