I just replaced the factory head unit in our 2014 CX-5 Sport (technically the “nav” head unit, but without the actual nav hardware installed) with a new Boss unit compatible with CarPlay. Much to my surprise, everything seems to be working well! Only catch…. as I was putting the dash and everything back together, I dropped the screw for the lower bracket that supports the radio somewhere in the dash, probably never to be found again. Not a huge deal, since the new head unit is much lighter than the factory unit, and the two upper screws are probably enough to keep everything in place. But in a perfect world, I’d like to get a replacement screw from Lowe’s, so I just need the specs on this screw first. I know it had a hex head, 10mm, but I don’t know the thread size/width. I did a few google searches for part diagrams but couldn’t come up with the right screw. Anyone know the details on the screw I’m talking about? This is the screw that helps support the factory radio on the bottom bracket.