Search results

Selling my 505zoom intake manifold. It was 1 of two red ones. Egr block was rewelded by Rich for the previous owner. Comes with throttle body no IAC or tps and egr tube. And all fittings. Will post pics as soon as it stops raining here. 450 shipped inside the states

I've been noticing lately that when I start my car in the mornings it tries to die for about 30 seconds before it decides to run. My idle will be sporadic and it can't hold vacuum. Advice? Last time I checked compression it was the same across all cylinders.

I'm looking for an OEM direct fit msp short radiator. Used is fine. No leaks or cracks etc...something around 150ish

I have some bad vibrations when I have a/c or defrost on imy car. I know most of it is from my solid motor mounts. Should my vacuum be sitting at 15-17 with it on though? Any way to slightly reduce the vibes without getting rid of the mm?

Hello all, I have seen a few people running 2000 na miata cubby slots in one of their din spots. My question is would a gauge mounting plate from same year miata also work without lots of cutting/ fabbing? I'm tired of my gauge cluster pods covering my line of site to my cel and getting hit with...

Just saw a black mica msp with bronze rims west bound on i66 in Virginia. Looked like a mirror image of mine lol

I'm looking for a 3.5 msp front lip with fog deletes. If you'd be interested in trading for fog lights+ harness even better. extra interested in one already black mica

Just finished up with install of 505zoom manifold. After tracking down a few vacuum leaks it's finally running. With my stock injectors it will randomly go super lean at cruise and my vacuum fluctuates. But with 440s it seems to be fine. Possible bad injector? Don't really want to run 440cc...

So I have an exhaust leak at my manifold to head flange. Does anybody know a quality machine shop in va thay would be able to fix the slight warpage being that it's ss?

So I need to pull my manifold off and replace my turbo. Last time I had the manifold off I just pulled my thermostat off and removed all 5 dp bolts to get everything out. Anyone with an aftermarket downpipe have any suggestions on easier ways to remove the turbo assembly? I'd rather not spend 8...

Curious about what most of you guys with wideband o2 are seeing as AFR out of boost under normal driving conditions. I'm seeing 14.3-15.1 when cruising 16.1 when shifting then bumps to 13.6 before going back to 14.7 Asking because I couldn't find much information on the car and I'm barely...

Need one foglight. Would take both if the price is right. Also looking a 3.5 lip

Used stock turbo manifold off of a 03 mazdaspeed protege. Has 2 cracks that didn't go all the way through. Shopped checked it after replacing. Looking for 80+shipping obo

Bought my msp back in December from a sketchy place in Northern Va. Been slowly restoring it. Mods: ghl downpipe Vibrant exhaust Panned auto fmic Aem cai Awr 95 duro front/rear mom Awr 88 duro side inserts Ebachi pro kit 03 protege rear tokico blues Dgm lip nardi miata wheel Innovate mtxl...

So I'm 100% positive my exhaust manifold is cracked at my egr hookup and 2nd runner. Will this cause a lean code p0171?

I have for sale a welded msp lsd with 30k miles on it. Also msp steering wheel in decent condition Looking for 250 plus shipping for the diff and 150 plus shipping for the wheel All prices are obo Can be reached through text at 5402461079 The diff I'm willing to go half on shipping. It has...

Noticed the noise the other night. Any gear around 2k-3k rpm or in neutral coasting down a hill and occasionally if I rev in neutral I hear a lovely whine. Sounds kind of like faint straight cut gear noise but not as loud. I'm kind of ruling out transmission issues because it will do it while in...

Installed my new ssafc last night. Upon start up it throws 3 codes. P0122 p0107 and another for evap system. Issue didn't exist before. I know I tapped the right wire. Ground may be wrong possibly. What could cause these? Writing issue?

Picked up a used v2 ssafc recently and decided to take a shot at installing tonight. Got the panel and ecu out fairly easily but I need to make sure I'm tapping/cutting the right wires. I did do a search and found a how to thread but all the pics are gone. Pretty sure I have the right 4 wires...

So I've had my msp for about 4 months now and is daily driven. Since I got the car, I've had some idle issues among other things. When cold start idle holds at 1500rpm and slowly decreases down to around 600rpm I believe. Noticed some bucking in 2nd and 1st gear when easing of the accelerator...