Recent content by vroom

No, your HID bulbs have a D4S socket while the Halogen bulbs are H11. The voltage is also totaly different.

These are fixed Halogen projectors, not auto-adapting/leveling HIDs. Besides, the first line in the description says: "NOT COMPATIBLE ON MODELS W/ FACTORY HID HEADLIGHTS" So I guess that is your answer...

Why do you say HID are not much better? Have you looked at my review (click link)? There are a few down sides, but they are MUCH better than LED, have an almost perfect beam spread (look at my pictures), and last a whole lot longer than high intensity halogens.

The statement in red is exactly the reason for the backlash you say you received. It is by far the worst quality a bulb can have, and negates any increase in brightness. Most people don't realize that bleeding above the cut-off has very little to do with the bulb, and mostly with the projector...

No canbus required, only the relay. As for the bulb type, the names have changed since my install. You can look in my review, I wrote down the proper bulb to use using the old names. You can then ask the great customer service at TRS what it translates to in the new nomenclature.

Look at the title of the thread (and read the first few posts)... I'm the OP!

HIDs are more efficient than halogens. This means that for the same power (Watts), they emit more visible light and less heat. So melting the housing is very unlikely unless a catastrophic electrical failure occurs (short). Nobody can guaranty a failure won't happen, but buying a good kit at...

You can also look at my post #23. Note that when I mention "DSP", I mean "Ballast". "DSP" was the ballast model... I agree with runtohell121 here. A halogen bulb filament and a HID arc are very similar in shape, size and location so they are interchangeable to some degree in a projector. The...

Here in Qubec (Canada) they are everywhere and have been for over a decade. I see several CX-5s during my short commute every day, and even more 3s. There are 4 large dealerships 20 minutes from where I live. Definitely a love affair going on between Quebec and Mazda. My last car was a yellow...

I've tried oil but it just makes the wax transparent for a while. The wax eventually comes back. I now use a big white pencil eraser. Works like a charm and takes about 15 minutes to do the entire trim. BTW, wax does not wash off in the rain (it's strongly hydrophobic). It was applied to the...

For what its worth, I agree with ALafya that a CUV won't be any safer than a sedan. Crash tests perform about the same. The CUV might give you better visibility and awareness, but higher center of gravity makes it more prone to roll. Sort of cancels out.

I use Aquapel once a year in fall (amazing stuff), and also have RainX fluid (although I don'f feel it does much). No problems here. In fact, the Aquapel is so good I barely need to use washer fluid at all...

Put the check in you pocket and enjoy your improved, more aerodynamic car!

I've driven FWD with snow tires (they are mandatory here in winter, AWD is not) all my life except these last couple years. My winter conditions are as bad as they get. I've never gotten stuck in a dangerous situation, I've never been in any accident, I've never even slid off the road. And I've...

+1. Absolutely! I could not have put it any better!