2022 Turbo CX-5, autodimming mirror (not frameless). I am trying to remove the forward sensing camera cover to tap into the rearview mirror cable (dash cam installation). The official CX-5 instruction says pull the right side of the panel (label A in the picture) to the right, then do the same on the left side (label B). But no matter how hard I pull on the panel, it refuses to come off. I am applying quite a lot of force. Similar luck on the left side. I also tried following Auto Minute's Youtube video using a pry tool. Tried to force the panels away from each other by inserting the tool into the gap (label C), heard a definite crack somewhere close to the windshield and decided to back off before I break any plastic pins. Is there a hidden screw that I am overlooking? Should I be pushing both panels inwards when pulling them apart? Or maybe pushing one inwards while pulling the other one outwards?