Looking for info on MX-3 and MX-6 Drivetrain and Wiring

Miklos51

Member
:
Miata
Hello all,

First post and an explanation of why I'm here!

I'm planning on embarking on a project for a purpose built mid engine track and auto-x car, built on a tube chassis, using Miata suspension, MX-3 transaxle and CV shafts, with a KLDE power plant. The front suspension will be a complete Miata subframe and steering rack, bolted to the chassis in an Exocet type fashion. The rear end will be a custom tube frame to house the engine and transaxle, but based on a Miata rear subframe, using the stock control arms and locations. It will be an open aired single seated short wheelbase racer.

I have some questions regarding the combination of MX-3 and MX-6 drivetrain and harness.

1. Is the KLDE directly 'plug and play' into a MX-3 harness?

2. Will the KLDE perform on the MX-3s ECU? If not, does the KLDE ECU use the same pin out as the MX-3 ECU?

I had more question when a began writing this post, though they've since escaped me. When they come back I'll post those as well.

Thanks for any and all help on the subject.

Miklos51
 

Latest posts

Back