HELP! Intake manifold removal

[Greensleeper]

Before starting, YES I HAVE CHECK EVERY POST ABOUT MY QUESTION IN A SEARCH!

So, how do I remove the nut under the Number 4 intake runner (the one near the EGR valve and throttle body?). I've tried every socket/wrench that I have (12mm I know) and can't reach or have enough motion to loosen it.

Thanx!

PS: My fuel rail is removed to give me more space.

 

[Greensleeper]

OK guys I removed it!!!

 

[kcbhiw]

OK guys I removed it!!!

As a reference for others, what was your solution?

 

[viVid]

I used a box-end wrench... it was a PITA, but it got the job done.

 

[03promaz]

i didnt have any problems taking mine off

 

[Greensleeper]

I used a box-end wrench... it was a PITA, but it got the job done.

Exactcly what i've done!

BTW, can I remove only THE UPPER manifold? I have tried but the lower manifold studs and the head studs are placed in a way it can't be removed that way... Maybe i'm missing something?

 

[melicha8]

did you try getting at the bolts for the lower and the upper by going under the car?

 

[Greensleeper]

did you try getting at the bolts for the lower and the upper by going under the car?

Nope and where the car is I can't raise it to work under... I guess I will have to reach them by the side and go with a little force...

 

[Maxx Mazda]

You have to remove both halves ofthe manifold, or it won't work. The bottom part is bolted onto a support bracket by the oil filter. To get the bolts you mentioned in your original post, I jsut used a 12mm socket with a 12" extension, came out no problem.