Built MSP/Protege Turbo Kit

[neilv]

After 2 years in the making of this turbo kit, I have finally decided to sell it as I’m likely going to be selling my MP3 very soon. The idea of this kit was to make 180-200whp easily on stock boost and be reliable as well for a DD. Nothing was spared going into this kit. Everything is brand new minus the manifold/turbo/s and j-pipes and Ecu.

OEM MSP unflashed ECU
OEM Callaway MSP Manifold(2-3 runner may have been cracked. didnt take a chance and got it welded anyways. Relief cuts have been made to the manifold. can included a spare uncracked manifold as well)
Nissan SR20 T25 .64a/r turbo(fresh rebuild with 0km on it and clocked properly
New ATP MSP 6-8psi wastegate w/MSP wastegate bracket and Vibrant silicone hose
Corksport 2.5" SS S-pipe(rare)
Corksport 2.5" SS J-pipe(rare)

ATP 1.8 NPT to 4AN turbo fitting
ATP 4AN to 4AN 45degree swivel fitting
ATP 4AN 36" braided teflon feed fitting
ATP 4AN to 1/8NPT filtered fitting
ATP 1/8NPT to 1/8NPT .065 Restrictor fitting
Prosport Blue M20x1.5 Oil Sandwich plate
ATP 10AN threaded T25 drain fitting
ATP 10AN 12” braided Teflon drain fitting
ATP 45” 10AN to 1/2NPT fitting
Vibrant 1/2NPT threaded bung
New FS-DE Oil Pan
ATP 3/8” barb coolant fittings with banjo bolts
ATP 2 bolt 2.5” Compressor inlet adapter
ATP 3 bolt 2” compressor outlet adapter
ATP 4ply 2” to 2.5” 90degree coupler
ATP T25 gasket
ATP T25/28 5 bolt outlet gasket
ATP T25 drain gasket

New Mazda Exhaust Manifold gasket
New Mazda S to J pipe gasket
ATP copper lock nuts for manifold to turbo and turbo to s-pipe
ATP grade 8 allen bolts for every adapter
AEM 2.5” dryflow Cone filter
CX Racing 28x7x2.5 Intercooler kit with 2.5” aluminum piping, silicone couplers and t-clamps
Blitz Old school BOV w/Velosity stack(Loud!)
Prosport white/blue mechanical boost gauge
Prosport white/blue electronic oil pressure gauge
Prosport white/blue air/fuel gauge


The kit is basically fully assembled and ready to go. It only needs the 1/2NPT bung to be welded to the oil pan , get 2 feet of 3/8” hose for the coolant lines and get the BOV bung welded onto the IC pipes. Other than that this kit is all ready, pre-assembled and torqued


Looking to get $1600 for everything. Located near Toronto Canada. Willing to ship or meet over the border in New York state.

 

[RicoP5]

How much with only the good manifold and none of the gauges or new oil Pan

 

[neilv]

i have 3 manifolds 2 are good 1 has a crack. the 1 is already bolted up to everything. the manifold was never cracked. i wasnt sure if it was a crack or not because cast iron isnt smooth so i got it welded anyways.

the manifold already inlcuded is "good" and wont crack again due to the relief cuts and the weld makes it stronger anyways. but i can throw in the other good manifold for an extra 60 if youd like.

take $100 off for no oil pan or gauges?

 

[giroux52]

How much for the turbo and dp only ?

 

[will6946]

How much for spipe only?

 

[neilv]

corksport s and j pipes have been spoken for. buyer hasnt picked them up yet though.

send me a pm and make me an offer on the turbo or anything else

 

[neilv]

half of the kit has been sold. only have manifold, turbo, stock downpipe ecu and other minor parts left.

mods can delete