Yeah, it came with small little triangle pieces for the black area where the mirror mounts.A Pillar? I think you mean B and C. A is where the RV mirror is.
Yeah, it came with small little triangle pieces for the black area where the mirror mounts.A Pillar? I think you mean B and C. A is where the RV mirror is.
Yeah, it came with small little triangle pieces for the black area where the mirror mounts.
Today I installed some glossy A, B, and C pillar plastic. Cost about $13 bucks from China.
They were matte blackWhat color were they before?
They were matte black
Agreed. That would be my concern with them. Then again $13 from China...can always switch them out!They look much nicer. Hopefully they don't scratch as easily as the OEM piano black pieces on the CX-9 (if they do, you might want to apply a coat of wax to them and keep it maintained to avoid scratches).
Am I missing something? I don't see any different trim.Installed new steering wheel trim from aliexpress just like the new CX5 Exclusive trim:
chrome ring around the logo?
Where did you get the sequential lights? I've been looking but couldn't find any that were specifically designed for the CX5. I only came across some universal strips.
Thanks! For the window trim I used 3M 1080 Matte Black. Matches the factory black trim pretty close. I had originally wanted to wrap the grill too, but looking at it I thought it would take way too long for me to learn the technique to do it even moderately well, so I went with Plastidip. Did about 5 coats of black and several coats of their Glossifier. I did not do the emblems on the rear as I did not want everything black. I like having a couple of pops on there, with the roof rails matching the exposed metal on the rims. I didn't really like how the roof rails and the rims were aluminum, and the moldings and grill were chrome. Here is another picture where it isn't so sunny out, which shows the black a little better.
<a href="https://imgur.com/1aTULqc"><img src="https://i.imgur.com/1aTULqc.jpg" title="source: imgur.com" /></a>
Today I installed some glossy A, B, and C pillar plastic. Cost about $13 bucks from China. Think it adds a nice touch. I believe this is standard on the GT and above but I have a touring. What do you guys think?
hello, I would like to do the same as you in the front of the car, it is very difficult to disassemble the front piece to paint it? Do you have some manual to disassemble the long bezel?
Thanks, looks really nice!
Was finally able to mount my kit after all the rain weve been having. Its styled after the Kenstyle and made in Taiwan (friend was nice enough to have it shipped over for me).
Im looking into possibly bringing the kit available here if I can work out logistics.
That kit looks great. I'd love to do that to mine. What is that one called?