Anyone found an OBD2 phone app that will read transmission fluid temp?
is there even a sensor in the transmission? if you have no sensor, then no app will help you.
if the PID works, can you share them?
thank you
What obd2 reader are you using? TorquePro reads out trans temps as well, although I thought some one on here said that the same sensor reports both(temps are the same) I'm using BAFX reader and can't get the FORScan demo app to connectReviving my old ancient thread
FORScan Lite recommended by "yugrus". Thanks Again. Love watching the engagement ratio of the i-Activ on the rear end.
In addition to AT fluid temp you can see rear diff temp as well.
I was pulling my boat today over the pass and pushed it pretty hard. The difference in temp between coolant and AT was about 15-20 degrees at the hardest. AT got up to around 211 degrees F while Coolant was around 192.
if the PID works, can you share them?
thank you
Nothing to enter for the CX-5 temps I listed above. Just add them in on Forscan Lite.
Sorry... talking about different apps and vehicles.
For the CX-5
Try out Forscan Lite
Fusion will probably work as well on CX-5 but haven't tested that out for AT temps. Pricewise Forscan will be cheaper.
On your Toyota... Fusion will read AT temps without any custom PIDs.
Have you ever seen an actual difference between the at and engine temps?No problem... I was happy to see that there is an actual AT temp sensor
Have you ever seen an actual difference between the at and engine temps?