My second mod...done!
just did this mod today, so proud of myself! I love this "how-to" section - I've already done the "keyless entry/ ignition on" mod. The hardest part of this one is definitely in the "putting back together" part, rerouting the cables. Also, removing the cable sheaths from the retainers. I don't have a spreader tool, so a small pair of needlenose pliers will do, although not perfectly. The problem is, if I were to go through this procedure again, lets say for replacing bulbs, I think the pliers would eventually wreck the plastic retainers. So, moral of the story, if you don't have the right tool for the job, maybe plan on doing these two procedures at once. Thanks Zap for the excellent write up!