I just got a new 2003 Protege5--it rocks! I want to remove the stock HU and speakers, which I think sound like a $10 boombox; and, replace them with an aftermarket stereo from my old Sentra SE. BTW, I want to thank everyone for their posts on this site, there's lots of great info; however, I still have a few questions and need some advice:
1) Is there a site that visually shows the stock radio removal? I noticed that http://www.astolfo.com/p5/p5install.asp is no longer running.
2) Also, I found a great post for removing the back door panels, but is there one for the front doors?
3) I have a JVC KD-SH55 HU, 4 Polk 6.5" speakers (can't remember model #), and a Kenwood powered subwoof (again, can't remember model) to install. Based on previous posts, it looks as if there are the materials I need to get (I'm looking at SoundDomain):
-Scosche MA1537 (install kit)
-Scosche MA03 (harness)
-Scosche SA68 (6" x 8" to 6.5" adaptors for front speakers)
From the previous posts, I imagine I'll need to drill into the speakers to get the screws to align for the back doors.
I've installed a few HU before, but never speakers, so I appreciate any advice you might have. Thanks!
-Pete
1) Is there a site that visually shows the stock radio removal? I noticed that http://www.astolfo.com/p5/p5install.asp is no longer running.
2) Also, I found a great post for removing the back door panels, but is there one for the front doors?
3) I have a JVC KD-SH55 HU, 4 Polk 6.5" speakers (can't remember model #), and a Kenwood powered subwoof (again, can't remember model) to install. Based on previous posts, it looks as if there are the materials I need to get (I'm looking at SoundDomain):
-Scosche MA1537 (install kit)
-Scosche MA03 (harness)
-Scosche SA68 (6" x 8" to 6.5" adaptors for front speakers)
From the previous posts, I imagine I'll need to drill into the speakers to get the screws to align for the back doors.
I've installed a few HU before, but never speakers, so I appreciate any advice you might have. Thanks!
-Pete