CorkSport.com is MAZDA PERFORMANCE!
CorkSport.com is MAZDA PERFORMANCE!
Results 1 to 2 of 2

Thread: [2014-2016 BM] JDM mud flaps installed!

  1. #1
    手前の言葉が俺は聞き捨てよう TheMAN's Avatar


    Join Date
    Oct 2002
    Location
    Dallas, TX
    Posts
    5,858

    [2014-2016 BM] JDM mud flaps installed!

    For the sake of protecting my "investment", I decided to get some mud flaps for the 3, but the ones sold here (and other countries) are unpainted black rubber pieces that makes the car look like an 80s econobox, ruining the clean looks of the car. Hell no! Thanks to the easily available JDM accessories catalog, I found color matching ones are sold in Japan. Some shopping around later, I managed to get a full set shipped to my door for around $180, a little more than buying the ugly version but not enough to break the bank!

    The front set

    The rear set

    They didn't come with instructions, which wouldn't matter for most people here since it'll be in Japanese. However, the English instructions that Mazda USA has for the unpainted version works as they're essentially the same.

    They are tiny, "cute" little pieces that won't stand up to rally abuse, but works fine for the street. I'm pretty sure they're meant to be low profile to avoid it being snagged over debris, speed bumps, and pot holes, not to mention to avoid hurting aerodynamics too much (hurts gas mileage). My idea to get these is to prevent rock chips in the rocker panel and tar/road grime from getting on there and the back bumper, which are a real bitch to clean!

    Front ones installed:


    Rear ones installed:


    They're hardly noticeable and blends in well with the car since it's painted... really clean if you don't want to get the Mazdaspeed side skirts (that's what the OEM aero kit really is) like me.



    The ones for the "BN" (2017-2018) are also available, the rears have a different part number because of the new rear bumper design
    There are also rear ones for the sedan, of course, and they're the same whether it's a BM or BN because there's no changes in the rear bumper
    Attached Images Attached Images
    TheMAN
    '01 BJFP MT
    '05 BK3P HB AT
    '16 BMYFS AT

    For Protege and Mazda3 info, come see the Protege FAQ

  2. #2
    Registered Member

    Range Rover, Series

    Join Date
    Feb 2019
    Location
    Mexico
    Posts
    1

    2014 2016 BM JDM mud flaps installed

    Selling my used set of rally armor mud flaps, hardware brackets included, may be missing a screw or two.

    Price: 40
    Buyer pays shipping and PP fees.

Similar Threads

  1. 2014 CX-5 Accessories for 2016 CX-9?
    By needmovies in forum CX-9 Accessories & Appearance
    Replies: 4
    Last Post: 10-24-2016, 07:51 AM
  2. Need opinion - Moving from CX-5 2014 to CX-5 2016
    By Mayoo in forum CX-5 General
    Replies: 14
    Last Post: 03-30-2016, 09:29 PM
  3. Interior changes 2014-2016
    By silvercoat in forum CX-5 General
    Replies: 38
    Last Post: 03-10-2016, 05:14 PM
  4. 2014 vs 2016 CX-5
    By calvindillinger in forum CX-5 General
    Replies: 9
    Last Post: 08-19-2015, 09:24 AM
  5. Pearl White with Rallyarmor flaps installed (pics)
    By Smokehouse in forum Mazdaspeed3
    Replies: 17
    Last Post: 02-06-2009, 10:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •