maxcorpious
Member
- :
- 2010 Mazda CX9 AWD
Hello Everyone,
I'm trying to replace the brake booster, but it's getting stuck on the pipes that go to the heater core through the firewall. Do I need to separate the booster from the master cylinder before I try to remove the booster? The master cylinder won't separate easily from the booster. I removed the two bolts that secure the brake master cylinder to the booster, but the cylinder is stuck to the booster. Any tips or trick would be GREATLY appreciated.
Thank you,
Max
2010 CX9 AWD
I'm trying to replace the brake booster, but it's getting stuck on the pipes that go to the heater core through the firewall. Do I need to separate the booster from the master cylinder before I try to remove the booster? The master cylinder won't separate easily from the booster. I removed the two bolts that secure the brake master cylinder to the booster, but the cylinder is stuck to the booster. Any tips or trick would be GREATLY appreciated.
Thank you,
Max
2010 CX9 AWD