VersaTuner - tuning software for Mazdas
VersaTuner - tuning software for Mazdas
Results 1 to 15 of 15

Thread: 03' front bumper OE part number?

  1. #1
    Registered Member

    97camaroSS e30 318is Spicy #1348

    Join Date
    Aug 2012
    Location
    Manhattan Kansas
    Posts
    126

    03' front bumper OE part number?

    I have a spicy 03' that an elderly lady decided to turn into me head-on while I was minding my own business at a stop sign. Its a shot in the dark, but my body shop assures me that if they have the OE bumper part number that they WILL get it

  2. #2
    Red 5 Standing by Rogue's Avatar
    Donated: $15

    2003 Mazdaspeed Protegé

    Join Date
    Nov 1979
    Location
    Roswell, GA
    Posts
    7,903
    I believe it is BN7H-50-031 - Bumper, Front (MPS SUSP)
    https://imgur.com/a/YNePrAp

    2018 Mazda CX-5 GT-AWD
    2003 Mazdaspeed Protegé #530
    2013 Mazda3
    2002 Mazda Protegé5

  3. #3
    Registered Member

    97camaroSS e30 318is Spicy #1348

    Join Date
    Aug 2012
    Location
    Manhattan Kansas
    Posts
    126
    Looks like they're gonna have a real fun time getting the bumper. Mazda shows the regular protege front bumper as the same part number, only with a "-BB" on the end. Turns out the lower grill is split too

  4. #4
    Registered Member

    97camaroSS e30 318is Spicy #1348

    Join Date
    Aug 2012
    Location
    Manhattan Kansas
    Posts
    126
    Anyone know if the MP3 bumper is the same as the MSP?

  5. #5
    Registered Member

    lolmsp lolms3

    Join Date
    Mar 2007
    Location
    757
    Posts
    5,349
    Quote Originally Posted by AutoXSS View Post
    Anyone know if the MP3 bumper is the same as the MSP?
    MSP bumper is same as MP3's. Worst case scenario, you get a P5 bumper and have the body shop fill in the two holes for the sidemarker lights that only come on the P5 front bumper.

  6. #6
    Swollen Member Natey's Avatar
    Donated: $40

    Mazda

    Join Date
    Jan 2003
    Location
    Pleasure Point, California
    Posts
    6,522
    03 MSP had the same front bumper as a P5 or MP3. '03.5 did away with the fog lights for brake ducts but it'll still fit, you just won't have fogs anymore.
    Those are just reflectors on the bumper. The side marker lights are on the fenders and weren't there at all for '02
    Last edited by Natey; 10-29-2019 at 01:20 PM.
    NPOT (Norcal Protege Options Team)
    .
    http://www.cardomain.com/ride/335883...photo-gallery/

  7. #7
    Red 5 Standing by Rogue's Avatar
    Donated: $15

    2003 Mazdaspeed Protegé

    Join Date
    Nov 1979
    Location
    Roswell, GA
    Posts
    7,903
    Quote Originally Posted by Natey View Post
    03 MSP had the same front bumper as a P5 or MP3. '03.5 did away with the fog lights for brake ducts but it'll still fit, you just won't have fogs anymore.
    Those are just reflectors on the bumper. The side marker lights are on the fenders and weren't there at all for '02
    The Protege5 had the parking amber lights in the bumper whereas the MP3/MSP had parking lights built into the headlight housing. The two bumpers have different part numbers.
    The 03.5 MSP had an additional "front lip" that replaced the fog lights, but still used the same bumper.
    The lights that were on the fender starting in 03 for all Proteges were turn signal indicators.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  8. #8
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    5,420
    The 2002 P5 didn't have the side marker lights.

    The 2003 P5 had side marker lights.

    (In Canada anyway. But I think all of North America)
    The Diagram Dude

  9. #9
    F - L - O - R - I - D - A orlandomsp's Avatar

    03.5 MSP

    Join Date
    Apr 2005
    Location
    Portland, OR
    Posts
    883
    Quote Originally Posted by pcb View Post
    The 2002 P5 didn't have the side marker lights.

    The 2003 P5 had side marker lights.

    (In Canada anyway. But I think all of North America)

    All P5s had combined reflex reflectors and amber side marker lamps on the front bumper in N America(sedans had these incorporated into the headlamps). In 2003, turn signals were also added to the front fenders.

  10. #10
    Swollen Member Natey's Avatar
    Donated: $40

    Mazda

    Join Date
    Jan 2003
    Location
    Pleasure Point, California
    Posts
    6,522
    Quote Originally Posted by Rogue View Post
    The Protege5 had the parking amber lights in the bumper whereas the MP3/MSP had parking lights built into the headlight housing. The two bumpers have different part numbers.
    The 03.5 MSP had an additional "front lip" that replaced the fog lights, but still used the same bumper.
    The lights that were on the fender starting in 03 for all Proteges were turn signal indicators.
    I could have sworn the markers on my US P5'a front bumper were just reflectors. Maybe I justt never paid attention though, heh. None at all on my MSP, but it does have lights on the fenders. Also, my bad about the bumper. I should have remembered it's only the lip that's different on the 03.5. I remember when everyone was trying to fit them on their P5s.

    Here's my '02 P5:


    ..and my '03.5 MSP:
    Last edited by Natey; 11-07-2019 at 02:15 PM.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  11. #11
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    5,420
    Oops, I was mixed up with these lights.



    Turn signal lights I think?
    My car doesn't have them.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  12. #12
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    5,420
    I was mixed up with my parts car.
    It's got no sidelights at all.

    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  13. #13
    F - L - O - R - I - D - A orlandomsp's Avatar

    03.5 MSP

    Join Date
    Apr 2005
    Location
    Portland, OR
    Posts
    883
    Quote Originally Posted by Natey View Post
    I could have sworn the markers on my US P5'a front bumper were just reflectors. Maybe I justt never paid attention though, heh.
    Yep, they were probably burned out. US federal vehicle lighting regulations require illuminated amber and red lamps paired with reflex reflectors on the front and rear ends of the car, the CA law is basically a duplicate of FMVS108 with some small changes.
    Last edited by orlandomsp; 11-07-2019 at 03:30 PM.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  14. #14
    F - L - O - R - I - D - A orlandomsp's Avatar

    03.5 MSP

    Join Date
    Apr 2005
    Location
    Portland, OR
    Posts
    883
    Quote Originally Posted by pcb View Post
    I was mixed up with my parts car.
    It's got no sidelights at all.

    Oh wow. That looks like the WingsWest kit from back in the day.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  15. #15
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    5,420
    Yea, it is.
    Apparently, it was $3,400 new.

    But it's half broken and has big fitment issues.





    (I got drunk and "tinted" my headlights. Lol)

    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

Similar Threads

  1. Rear bumper Part Number from Mazda
    By WHITE RKT SP20 in forum Protege5
    Replies: 1
    Last Post: 07-01-2012, 01:10 AM
  2. Replies: 6
    Last Post: 06-23-2011, 03:14 AM
  3. Front Bumper Grill Cover part number?
    By Mazdanspeed in forum Mazdaspeed3
    Replies: 5
    Last Post: 02-06-2009, 03:40 PM
  4. Part number for UDSM rear Bumper
    By REAL-OC in forum Protege5
    Replies: 19
    Last Post: 03-04-2007, 09:36 AM
  5. MSP front bumper part number needed!!! ASAP!!
    By Chicken SOup in forum Protege5
    Replies: 8
    Last Post: 01-15-2004, 07:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •