Results 1 to 9 of 9

Thread: 2016 rear brake TSB resolution

  1. #1
    Registered Member


    Join Date
    Apr 2019
    Posts
    4

    2016 rear brake TSB resolution

    Hi folks,

    Has anyone received good resolution to TSB 04-001-18-3418? This is regarding the rear brakes on a 2016 CX-5. I was able confirm that my VIN is affected. Here is the abstract to this issue:

    https://www.nhtsa.gov/vehicle/2016/M...Communications

    Some vehicles with the electric parking brake (EPB) may exhibit rear brake dragging, resulting in brake noise and abnormal outer brake pad wear. The vehicle may also roll momentarily when starting from a stand-still with the EPB applied. This concern may be caused by the EPB not releasing completely. Modifications to the calipers have been made to eliminate this concern.

    I'm going between the dealer and Mazda USA on this now. I'm trying to determine what the exact "Modifications to the calipers" are that fixes the rear brake issue...

    In 45,000 miles I have gone through one set of rotors and two sets of pads.

    Thanks!
    Last edited by mcoulter; 04-15-2019 at 05:21 PM. Reason: Adding details

  2. #2
    Registered Member


    Join Date
    Apr 2019
    Posts
    4
    Sorry. I'm the OP here and just realized there is a sub forum for brakes. Can the mods move my post there please?

    Thanks!

  3. #3
    Registered Member Anchorman's Avatar

    2019 CX-5 GT 184 2.2 diesel auto - Sonic Silver

    Join Date
    Jan 2016
    Location
    Derbyshire UK
    Posts
    2,385
    Quote Originally Posted by mcoulter View Post
    Sorry. I'm the OP here and just realized there is a sub forum for brakes. Can the mods move my post there please?

    Thanks!
    The rear calipers have got new mechanisms. The whole shebang including damaged pads and discs get done under warranty.

  4. #4
    Registered Member yrwei52's Avatar
    Donated: $8

    2016 Mazda CX-5 GT AWD w/Tech

    Join Date
    Mar 2015
    Location
    Plano, Texas, USA
    Posts
    7,386

    Arrow 2016 rear brake TSB resolution

    Quote Originally Posted by mcoulter View Post
    Hi folks,

    Has anyone received good resolution to TSB 04-001-18-3418? This is regarding the rear brakes on a 2016 CX-5. I was able confirm that my VIN is affected. *
    This TSB has been discussed many times here since Anchorman posted the the latest official document as Mazda had gone through several different fixes and failed. I was lucky that I persuaded the master tech at my Mazda dealer replaced rear brake calipers*rotors*and pads based on this TSB right before my 3-year / 36,000-mile new-car warranty expired although my EPB brake dragging issue at the time was very minimum. I knew my 2016 CX-5 needed newer irevised rear calipers or the problem will be there which would cause noise and early and uneven rear brake pads wear. Some even experienced total lock-up on the highway due to extremely hot rear brake system from continuously dragging. All 2016 CX-5's with EPB assembled before September 9, 2016 will have older version of rear calipers and will have this issue sooner or later.

    See the attachment for details:

    TSB R052/16C - Noise from REAR BRAKE/Trace of Rear Brake Dragging

  5. #5
    Registered Member


    Join Date
    Apr 2019
    Posts
    4
    Thank you all very much!

    FWIW, I did complain about the rear brake wear last April when the care was within warranty. I was essentially brushed off my the service department. I probably used the word "recall" since it was crazy that back pads (and therefor rotors) would wear so quickly... so the service guy was probably technically accurate when he said "no, no recall on this" but they didn't even offer to do the "diagnosis procedure" spelled out in the repair guidance file.

    So here I am one year (and out of warranty) later doing my best to document my efforts last year. Fortunately I have my parts receipt for the pads & rotors and can confirm what the mileage was at that time.

    Wish me luck...

  6. #6
    Registered Member Conrad 16.5's Avatar

    2016.5 CX-5 Grand Touring AWD titanium/black

    Join Date
    Sep 2016
    Location
    Northern Illinois
    Posts
    863
    Quote Originally Posted by yrwei52 View Post
    This TSB has been discussed many times here since Anchorman posted the the latest official document as Mazda had gone through several different fixes and failed. I was lucky that I persuaded the master tech at my Mazda dealer replaced rear brake calipers*rotors*and pads based on this TSB right before my 3-year / 36,000-mile new-car warranty expired although my EPB brake dragging issue at the time was very minimum. I knew my 2016 CX-5 needed newer irevised rear calipers or the problem will be there which would cause noise and early and uneven rear brake pads wear. Some even experienced total lock-up on the highway due to extremely hot rear brake system from continuously dragging. All 2016 CX-5's with EPB assembled before September 9, 2016 will have older version of rear calipers and will have this issue sooner or later.

    See the attachment for details:

    TSB R052/16C - Noise from REAR BRAKE/Trace of Rear Brake Dragging
    The build date on my CX is 8/2016 but I'm not having any issues with my rear brakes. My warranty will be up in December of this year. What would you advise?
    "Don't bother me with facts, Son. I've already made up my mind." -Foghorn Leghorn

  7. #7
    Registered Member


    Join Date
    Apr 2019
    Posts
    4
    I'm going through this now and *to me* the key issue is the lot number stamped on the caliper. Is your number less than 697?

    This information is on page 6 of the TSB:

    NOTE: Part numbers of caliper have not been changed by this modification. Distinguish the modified one from old one using the 3-digit lot number (Production Date) stamped on the caliper. Calipers with the lot number (production date) of 697 (2016/09/07) and higher are modified.

  8. #8
    Registered Member
    Donated: $15

    2016.5 CX 5 Touring AWD, 2015 SCION XB

    Join Date
    Mar 2013
    Location
    ABE area, Pennsylvania, USA
    Posts
    1,346
    Quote Originally Posted by mcoulter View Post
    I'm going through this now and *to me* the key issue is the lot number stamped on the caliper. Is your number less than 697?

    This information is on page 6 of the TSB:

    NOTE: Part numbers of caliper have not been changed by this modification. Distinguish the modified one from old one using the 3-digit lot number (Production Date) stamped on the caliper. Calipers with the lot number (production date) of 697 (2016/09/07) and higher are modified.
    I went through the same crap you are now, dealer not knowing their own TSB issues. I had to show them a print out of the TSB in question and still got that fuzzy look. My calipers didn't even have a lot number stamping on them.

  9. #9
    Registered Member Conrad 16.5's Avatar

    2016.5 CX-5 Grand Touring AWD titanium/black

    Join Date
    Sep 2016
    Location
    Northern Illinois
    Posts
    863
    Quote Originally Posted by mcoulter View Post
    I'm going through this now and *to me* the key issue is the lot number stamped on the caliper. Is your number less than 697?

    This information is on page 6 of the TSB:

    NOTE: Part numbers of caliper have not been changed by this modification. Distinguish the modified one from old one using the 3-digit lot number (Production Date) stamped on the caliper. Calipers with the lot number (production date) of 697 (2016/09/07) and higher are modified.
    Thanks for pointing this out to me, page 5 actually.

    Anyone know if it's possible to see the 3-digit lot number without pulling the wheel off? I'm not familiar enough with those calipers to know if it's visible or not.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

Similar Threads

  1. 2016 rear brake dragging
    By Midnight Rider in forum CX-9 Wheels, Tires, Brakes & Suspension
    Replies: 0
    Last Post: 01-06-2019, 12:48 PM
  2. HELP! Can't get the rear brake piston to compress! 2016 CX5
    By pbesong in forum CX-5 Wheels, Tires, Brakes & Suspension
    Replies: 33
    Last Post: 12-30-2018, 02:10 PM
  3. Replies: 35
    Last Post: 12-06-2017, 04:03 AM
  4. 2016 CX-5 Rear brake wear
    By ercarrasco in forum CX-5 Wheels, Tires, Brakes & Suspension
    Replies: 6
    Last Post: 12-03-2017, 07:33 PM
  5. Were any changes made to the rear of the 2016 to 2017 rear bumper?
    By Road Warrior2 in forum CX-5 Accessories & Appearance
    Replies: 1
    Last Post: 10-23-2017, 02:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •