Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: Fog Light/Sequential Turn Signal installation

  1. #1
    Registered Member

    2018 Mazda cx-5

    Join Date
    Aug 2018
    Location
    Huntsville, Al
    Posts
    30

    Fog Light/Sequential Turn Signal installation

    Good afternoon everyone. I ordered a set of Fog Light/Sequential Turn signals off ebay that are set to arrive this week. My goal is to install them this weekend. I dont think they come with instructions, so i was looking to see if anyone could point me in the right direction of a walk thru or videos showing the process of getting the bumper off to tying the wiring in.

    I would greatly appreciate any leads.

    here are the light i got coming - https://www.ebay.com/itm/2x-LED-Dayt...72.m2749.l2649

  2. #2
    Registered Member

    2019 cx-5 signature. 2019 cx-3 awd touring

    Join Date
    Dec 2013
    Location
    NYC
    Posts
    667
    these look pretty cool
    hope you get it installed soon..
    can't wait to see it

  3. #3
    Registered Member

    MAZDA CX5 AWD GRAND TOURING MACHINE GREY

    Join Date
    Jan 2018
    Location
    SoCal
    Posts
    78

  4. #4
    Registered Member

    2018 CX-5 GT

    Join Date
    Dec 2018
    Location
    NJ
    Posts
    140
    Those look pretty cool. I've been on the fence for a little while about getting a set of these. I like these a lot better than the ones that look like arrows when lit up.
    2018 Mazda CX-5 GT
    2016 Mazda CX-5 T -- sold
    2015 Yamaha FZ09 (Melisandre)
    2012 Yamaha R6 (Lucy) -- laid to rest
    2009 Mazda 3 (Fireball)
    1998 Chevy S-10 (Cindy)

  5. #5
    Registered Member

    CX-5

    Join Date
    Jan 2019
    Location
    TX
    Posts
    3
    Will these work on a CX 5 without the fogs?

  6. #6
    Registered Member

    MAZDA CX5 AWD GRAND TOURING MACHINE GREY

    Join Date
    Jan 2018
    Location
    SoCal
    Posts
    78
    Quote Originally Posted by tehsu View Post
    Will these work on a CX 5 without the fogs?
    Should work fine since the fog light plastic cover is independent from the longer plastic strip the DRL woul replace. See the photo of part in the ebay ad.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  7. #7
    Registered Member

    CX-5

    Join Date
    Jan 2019
    Location
    TX
    Posts
    3
    Quote Originally Posted by CX555GT View Post
    Should work fine since the fog light plastic cover is independent from the longer plastic strip the DRL woul replace. See the photo of part in the ebay ad.
    Yeah, some of the eBay listings say not to buy it if there are no fogs. I may just get fogs as well.

  8. #8
    Registered Member

    2018 Mazda cx-5

    Join Date
    Aug 2018
    Location
    Huntsville, Al
    Posts
    30
    i watched the posted video, but still unsure where to tie the wire harness into. the directions are rather vague.

  9. #9
    Registered Member

    2019 Mazda CX-5 Signature; 2019 Mazda MX-5 30 AE, RF, #150/3000

    Join Date
    Jun 2016
    Location
    Austin, TX
    Posts
    408
    I just watched the video as well.
    Physical installation is relatively simple, but nothing showed the electrical connections.
    I'm hopeful that the manufacturer sourced Molex connectors that interrupt the existing light harnesses.
    If the OP discovers that to be the case, I'm in for a set.
    2019 Soul Red Crystal Metallic CX-5 Signature
    2019 Racing Orange MX-5 Miata RF/MT 30th Anniversary Edition (9th Miata)
    29 Mazdas since 1974

  10. #10
    Registered Member

    2018 Mazda cx-5

    Join Date
    Aug 2018
    Location
    Huntsville, Al
    Posts
    30
    Quote Originally Posted by Turborascal View Post
    I just watched the video as well.
    Physical installation is relatively simple, but nothing showed the electrical connections.
    I'm hopeful that the manufacturer sourced Molex connectors that interrupt the existing light harnesses.
    If the OP discovers that to be the case, I'm in for a set.
    i'll keep you posted if i find the wiring diagram

  11. #11
    Registered Member

    2019 Mazda CX-5 Signature; 2019 Mazda MX-5 30 AE, RF, #150/3000

    Join Date
    Jun 2016
    Location
    Austin, TX
    Posts
    408
    Quote Originally Posted by Oppie1 View Post
    i'll keep you posted if i find the wiring diagram
    I appreciate that.
    A plug and play installation with sealed connectors is greatly preferred to modifying the existing harness.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  12. #12
    Registered Member

    MAZDA CX5 AWD GRAND TOURING MACHINE GREY

    Join Date
    Jan 2018
    Location
    SoCal
    Posts
    78
    If i remember it was four wires for power (battery), ground, turn signal and ACC power.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  13. #13
    Registered Member

    2019 Mazda CX-5 Touring

    Join Date
    Feb 2019
    Location
    TX
    Posts
    7
    Quote Originally Posted by Oppie1 View Post
    i'll keep you posted if i find the wiring diagram
    I just ordered them for my Touring I got the ones on ebay that said + fog light bezel. Did you ever get your installed? I have zero electrical knowledge. Hoping its pretty easy

  14. #14
    Registered Member

    2019 cx-5 signature. 2019 cx-3 awd touring

    Join Date
    Dec 2013
    Location
    NYC
    Posts
    667
    Here is a link to another set that posted in the other thread. They both look pretty good.

    https://www.ebay.com/itm/DRL-For-Maz...n/264050349187

    Link to video by charlestonMX5
    https://youtu.be/opsZ6-vjpk4
    Last edited by Young-nyc; 02-26-2019 at 05:29 AM.

  15. #15
    Registered Member

    2019 Mazda CX-5 Touring

    Join Date
    Feb 2019
    Location
    TX
    Posts
    7
    Quote Originally Posted by Young-nyc View Post
    Here is a link to another set that posted in the other thread. They both look pretty good.

    https://www.ebay.com/itm/DRL-For-Maz...n/264050349187

    Link to video by charlestonMX5
    https://youtu.be/opsZ6-vjpk4
    That's what I just ordered since my touring has no fogs. Just shipped yesterday

Page 1 of 2 12 LastLast

Similar Threads

  1. CX5 - LED fog light +turn signal
    By Lbear in forum CX-5 Accessories & Appearance
    Replies: 100
    Last Post: 10-12-2019, 05:09 PM
  2. brake light, TCS, wavy lines, and Oil light all on, power door locks and turn signal
    By Scotttheimpaler in forum CX-9 Wheels, Tires, Brakes & Suspension
    Replies: 6
    Last Post: 01-22-2015, 03:09 AM
  3. Replies: 10
    Last Post: 08-23-2014, 07:37 AM
  4. Replies: 0
    Last Post: 07-22-2014, 11:31 AM
  5. Tail Light Turn Signal's Need Help!
    By Maz2001MP in forum Mazda MP3
    Replies: 5
    Last Post: 01-26-2004, 05:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •