Compare auto reliability with reliable results at TrueDelta.com!

Compare auto reliability with reliable results at TrueDelta.com!
Results 1 to 2 of 2

Thread: Protege 2003 Manual Speed Sensor

  1. #1
    Registered Member

    Protege LX 2.0 MT 2003

    Join Date
    Sep 2018
    Location
    New Hampshire
    Posts
    1

    Protege 2003 Manual Speed Sensor

    Hi All,

    2003 Protege LX 2.0 Manual no ABS here. My speedometer doesn't indicate speed anymore. Had the same issue 7 years ago and the dealer replaced the speed sensor. But this is now my project car and I can't justify (am not allowed by my wife) spending money on it so any help/encouragement is greatly appreciated.

    I found the sensor and it really is in the most inconvenient spot, on the back of the engine, on the right, under a bunch of hoses and wires. I removed the battery, tray and intake to have some room. I removed the one bolt that's on the sensor and tried to pull it out by hand but the sensor is stuck. Then, disaster, the whole perpendicular metal piece broke off after my first attempt to pry it out. Then, disaster number 2, trying to pull it out, the whole plastic top of it broke off. Now, the remainder of the sensor that's in there is almost flush with the transmission case. I read about the "corkscrew method", drilling a hole and putting in a screw and trying to pull it out, but there's absolutely no way I can get a drill in there. I'm fairly mechanically inclined but I don't think I can take the entire intake manifold and all the wires and hoses off and then put it all back together...

    So, is there hope for my car? Or will the transmission need to come off? (which unfortunately I'm not equipped to do, and my wife won't let me pay someone to do it, which in turn, means it would be the end of the road for my beloved Protege...) Anyone having experience with this sensor, I will be infinitely grateful for your advice.

    Thank you very much!
    AJ

  2. #2
    MOTM Winner Jan '09 Kooldino's Avatar
    Donated: $20
    Authorized Vendor
    Administrator

    MP3

    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    11,655
    Pull the manifold, it's not that bad. Just take lots of pictures.
    Vivid Yellow MP3 - SpeedCircuit Turbo Kit @ 14-19 psi - SpeedCircuit forged motor - SpeedCircuit built trans with PAR gears & M-FactoryLSD - and FAR too many mods to list. 13.3 @ 108 - 18psi on the T3 in 2005
    Be sure to check out SpeedCircuit on facebook!

    Pope MSP Turbo Manifolds on sale now!

Similar Threads

  1. Looking to buy abs wheel speed sensor for 2003 mazda protege es
    By protegejustin19 in forum Want To Buy
    Replies: 4
    Last Post: 11-16-2016, 11:01 PM
  2. Replies: 4
    Last Post: 06-07-2016, 06:48 PM
  3. Mazda 6 manual transmission speed sensor
    By adam_1988 in forum Mazda6 Engine & Transmission
    Replies: 0
    Last Post: 02-20-2014, 01:20 PM
  4. Replies: 13
    Last Post: 05-26-2013, 11:40 AM
  5. WTB: Shift knob for 2003 PR5; 5-speed manual
    By h2opololea in forum Completed Transactions
    Replies: 4
    Last Post: 09-29-2011, 09:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •