Results 1 to 2 of 2

Thread: 2010 Toruing Front brake pads and hardware clips questions

  1. #1
    Registered Member

    2010 CX-9

    Join Date
    Apr 2018
    Location
    Kentucky
    Posts
    3

    2010 Toruing Front brake pads and hardware clips questions

    Are the front brake pads on this model oriented in inner and outer pads? Or are both pads the same and it doesn't matter which side of the rotor they are on?


    the hardware clips that come with. The side away from the rotor has tabs that stick out past the rotor bracket. are they meant to be bent over against the bracket to help hold the clip in place or is this not required?

  2. #2
    Registered Member

    2010 CX-9

    Join Date
    Jul 2010
    Location
    L.I., NY
    Posts
    107
    I used auto zone pads and they were the same inside and out. They go either way. The clips should snap in but there is no need to bend them over or do anything to them. Some pads sets come with wear indicators that usually attach to the top of the inside pad but it is separate from the clips. Hope that helps.
    2010 CX-9 GT AWD w/navi - Copper Red/Sand - Bought 6/25/10

Similar Threads

  1. front brake caliper clips
    By kornholio in forum CX-9 Wheels, Tires, Brakes & Suspension
    Replies: 2
    Last Post: 10-19-2017, 09:36 AM
  2. Mazda 5 2010 - Front Brake pads and discs replacement
    By MikeHere in forum Mazda5 How-To
    Replies: 16
    Last Post: 09-15-2014, 08:53 AM
  3. Replies: 30
    Last Post: 11-17-2013, 12:27 PM
  4. Front Brake Hardware kit
    By kornholio in forum CX-9 Wheels, Tires, Brakes & Suspension
    Replies: 5
    Last Post: 07-04-2013, 05:52 PM
  5. Brake pad clips/hardware
    By Coqui258 in forum Protege5
    Replies: 4
    Last Post: 09-11-2007, 07:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •