Results 1 to 2 of 2

Thread: 2018 CX-9 Remote Start - Fortin Evo-ALL / THAR-MAZ1 Install Questions

  1. #1
    eikon81g

    2018 CX-9

    Join Date
    Jun 2018
    Location
    Texas
    Posts
    2

    2018 CX-9 Remote Start - Fortin Evo-ALL / THAR-MAZ1 Install Questions

    I was reading a previous post regarding the 2018 CX-9 with the Fortin EVO-ONE and the THAR-ONE-MAZ3 T-Harness. Has anyone tested the EVO-ALL and the THAR-MAZ1 T-Harness in a 2018 CX-9. I am under the impression both setups are compatible and both should function the same for the 3X remote start function. I am getting ready to order the THAR-MAZ1 / EVO-ALL and the Flashlink 2 Programmer to do an install. It looks like I can get the hardware for around $116.00 and install and program it myself if this would be a working setup. Any advice on this would be appreciated, I would just revert to the last post's recommendation but the cost of the EVO-ONE / MAZ3 setup is like double. If it's all the same I'd like to save the cash. Thanks for looking!

  2. #2
    Registered Member

    CX-9

    Join Date
    Dec 2017
    Location
    Boston
    Posts
    99
    I posted on the other thread too, but the 1 is not "plug and play" and it requires splicing/soldering/etc.

    The 3 is a complete two sided harness.

Similar Threads

  1. '18 CX-9 and Fortin Remote Car Starter.... Success!
    By MattGoose in forum CX-9 Lounge
    Replies: 49
    Last Post: Yesterday, 10:26 PM
  2. Replies: 0
    Last Post: 05-13-2015, 06:07 PM
  3. Car alarm and remote start questions.
    By slobaru in forum Mazda5 Infotainment
    Replies: 2
    Last Post: 04-06-2014, 11:13 AM
  4. Aftermarket Remote Start Questions
    By mentalcase in forum CX-5 Accessories & Appearance
    Replies: 0
    Last Post: 03-01-2014, 09:22 PM
  5. Remote Start questions
    By ajpslp in forum CX-9 Lounge
    Replies: 15
    Last Post: 02-20-2011, 10:17 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •