Results 1 to 10 of 10

Thread: TAU - Tuner Amplifier Unit, Location & Details?

  1. #1
    Registered Member

    '17 3 & CX-5

    Join Date
    May 2017
    Location
    Canada
    Posts
    285

    TAU - Tuner Amplifier Unit, Location & Details?

    Asking from my experience with stereos in past Mazdas.

    I've decided I'm changing my front speakers and looking at adding a compact under-seat subwoofer.

    I do not want to bust out any windows, too old for that now, just want my music clearer with a fuller range with zero compromise on trunk space. If I can get to OEM Bose level performance or to match what's in our Chrysler Pacifica I'm golden.

    Front speakers will be Polk DB6502 components. Woofer and tweeter mounted in OEM locations. Plan to butcher the OEM woofers to use as a mount for the new speaker as others have done.

    "Sub" - considering Kenwood KSC-SW11 under the passenger seat.



    I've found a couple of threads which will be very helpful for getting to the door speakers - thanks to those who have posted.



    Onto the Q's:

    I have not been able to locate a service manual. Can anyone confirm where the TAU (Tuner Amplifier Unit) is located? I believe previous model was in the kick panel or above the kick panel beside the glove box?
    Secondary: A pin out on that unit? As I need to tap into existing for the sub I'm looking to go in educated. (Or if I can be pointed to a service manual that'd be swell :-))

    Also curious if the PAC-MAZOEM2 will work to avoid any splicing at all - I know some have used it in previous 3's and CX-5's. If the TAU has the same pin-out it should work just the same.

    - I've found an OEM speaker terminal adapter for the door wiring harnesses, anyone know of one for the tweeter or what the tweeter harness looks like?
    - Any tricks to pulling the A pillar, other than the tether?
    - Anyone mounted crossovers in the 17/18 yet? If so, where'd you go with them?

    If you have any other valuable info, I'm all ears.

  2. #2
    Registered Member

    CX-5 AWD, 2017

    Join Date
    Aug 2017
    Location
    Sweden
    Posts
    174
    Look at this thread. It tells you quite a bit about the door speakers, the A pillar and the tweeters.

    https://www.mazdas247.com/forum/show...e-in-CX-5-2017

    Do not mount a sub until you have listened to the sound after the Polk door speaker conversion. This unit is base heavy and I do not know if you really need a sub. My 4 Hertz 6.5 inch coaxials on the doors produce quite a lot of base. The original tweeters are very weak and need getting rid off. In spite of the coaxials I feel that the upper end needs some improvement and clarity. Perhaps the base heaviness has some thing to do with it and therefore, I am planning to change the tweeters too. The original door speaker mount already has a connector so you can use it, if using the original mount. No need for new connectors.

  3. #3
    Registered Member

    '17 3 & CX-5

    Join Date
    May 2017
    Location
    Canada
    Posts
    285
    Saw that thread, it's one of the ones I was referring to. And now we're talking about the same thing in 2 different spots ;-)

    I've already committed to replacing the whole front setup so the stock tweeters will be going when I do the doors.

    The purpose of using the aftermarket connector is, if installing the crossover in the doors, I can tap into the OEM tweeter and woofer wiring in the doors. From what I've seen the tweeter is running off of the same woofer connector and it just means I can avoid having the OEM wiring. Also gives me a spot to patch in a bass-blocker for a x-over without hacking OEM wiring. The service manual would help me confirm this, but I don't have it.

    It's also why I'm asking about the TAU.

    If I can get the pin out at the TAU, then I can choose to patch into OEM wiring there for the doors and use the OEM speaker connector and run new wiring to the tweeters, if I can fish it, and mount the x-overs under the dash. If I use the PAC-MAZ OEM amp interface (if it works) I can do all of this without snipping a single OEM wire :-)

    This is pretty much why I'm asking about the TAU. So I can figure out if I want to mount x-overs under the dash or in the doors.

  4. #4
    Registered Member

    2018 CX-5 Touring

    Join Date
    Feb 2010
    Location
    CT
    Posts
    162

  5. #5
    Registered Member yrwei52's Avatar
    Donated: $8

    2016 Mazda CX-5 GT AWD w/Tech

    Join Date
    Mar 2015
    Location
    Plano, Texas, USA
    Posts
    6,755

    Arrow TAU - Tuner Amplifier Unit, Location & Details?

    Quote Originally Posted by Studum View Post
    ⋯ The purpose of using the aftermarket connector is, if installing the crossover in the doors, I can tap into the OEM tweeter and woofer wiring in the doors. From what I've seen the tweeter is running off of the same woofer connector and it just means I can avoid having the OEM wiring. Also gives me a spot to patch in a bass-blocker for a x-over without hacking OEM wiring. The service manual would help me confirm this, but I don't have it.
    You do have non-Bose 6-speaker setup right? OEM speaker setup on yours has no cross-over and the door-speaker is not a "woofer". Your OEM door speaker is a 6" full-range dual-paper-cone speaker and you should consider the same "full-range" 6" 2-way coaxial speaker for replacement. And I agree with raj55 that don't consider a sub-woofer, especially a compact sub, until you have listened to the sound of your replacement door speakers. See my post in another thread.

  6. #6
    Registered Member

    '17 3 & CX-5

    Join Date
    May 2017
    Location
    Canada
    Posts
    285
    Quote Originally Posted by Martyd View Post
    Where's the frikkin like button!

    Thank you sir! if it's in there I'll find it :-)

  7. #7
    Registered Member

    '17 3 & CX-5

    Join Date
    May 2017
    Location
    Canada
    Posts
    285
    Quote Originally Posted by yrwei52 View Post
    You do have non-Bose 6-speaker setup right? OEM speaker setup on yours has no cross-over and the door-speaker is not a "woofer". Your OEM door speaker is a 6" full-range dual-paper-cone speaker and you should consider the same "full-range" 6" 2-way coaxial speaker for replacement. And I agree with raj55 that don't consider a sub-woofer, especially a compact sub, until you have listened to the sound of your replacement door speakers. See my post in another thread.
    Don't want to post the same thing twice... but plan is in motion.

    OEM tweeter has a crossover (in place as a cpacitor). New speakers have a crossover to separate tweeter / woofer.

    The OEM door speaker is a woofer, just not a sub woofer. It's the speaker in the system that outputs the low frequencies.

    Full range replacement isn't needed with a component set, which will always sound better than coaxials when comparing same speakers in the same line / class.

    I'm adding a compact sub because I know what to expect from the door speakers alone and that it won't be what I want it to be without the sub. My goal is to get to OEM premium-audio sound quality without the OEM premium audio price. The speakers I've chosen will be an upgrade over stock and the compact sub should be comparable to the Bose OEM sub. Again, not looking to blow the windows. Just more low end than the 6" door speakers will give up and the independent tuneability to my tastes that a systems of separate components provides.

    With my install plan I will be able to independently adjust bass volume and X-over vs rest of the system, be able to pick an x-over for the interior speakers (if I choose to put ones in via bass blockers), and be able to adjust the tweeter volume separately from the door woofers via Polk's X-over settings.

    Should be a nice upgrade for <$500 (CAN)

  8. #8
    Registered Member

    '17 3 & CX-5

    Join Date
    May 2017
    Location
    Canada
    Posts
    285
    Quote Originally Posted by Martyd View Post
    Cheers good sir. I didn't think to search for workshop manual. I was searching for "service manual". Lost in translation...

    And with that, for those who may be looking in the future, there is a TAU and it is in the same spot beside the glovebox / right side kick area. Not able to confirm pin-outs right now - but looks promising. I've got good feelings about this :-)


  9. #9
    Registered Member

    2018 CX-5 Touring

    Join Date
    Feb 2010
    Location
    CT
    Posts
    162
    Happy to have helped you. Good luck.

  10. #10
    Registered Member

    CX5 GT AWD

    Join Date
    Jun 2018
    Location
    New York
    Posts
    11
    keep me updated and let me know how the speaker install went and what you did.

Similar Threads

  1. Factory Bose Amplifier location in 2018 Mazda CX-9 Grand Touring?
    By Captain McFunk in forum CX-9 Infotainment
    Replies: 12
    Last Post: 09-23-2018, 07:06 AM
  2. Mounting location of amplifier
    By cohocarl in forum CX-5 Infotainment
    Replies: 4
    Last Post: 01-01-2015, 02:03 AM
  3. 2011 Non bose Head unit. External amplifier?
    By supacharged21 in forum CX-9 Infotainment
    Replies: 1
    Last Post: 05-12-2012, 04:07 PM
  4. ABS Unit location
    By BIGCU in forum Mazdaspeed Protege
    Replies: 11
    Last Post: 03-06-2007, 05:21 PM
  5. location location location orlando meet
    By mp5typer in forum Pics & Builds
    Replies: 1
    Last Post: 09-28-2003, 06:14 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •