Results 1 to 3 of 3

Thread: Polishing the Paint

  1. #1
    Registered Member

    2017 Mazda CX-5 Grand Touring

    Join Date
    Jul 2017
    Location
    Wisconsin
    Posts
    189

    Polishing the Paint

    Hello!

    I have a year old (17 GT), and was wondering if would hurt to get the paint polished if I only have a few very light swirls? I also want to have it clayed and then a sealant applied.

  2. #2
    Registered Member Jedi54's Avatar

    2005 RX-8, Grand Touring

    Join Date
    Nov 2010
    Location
    SoCal, CA
    Posts
    274
    won't hurt the paint as long as it's done correctly.
    are you planning on doing it yourself or having someone do it?

    You can clay it yourself, it's quite easy to do actually, just don't drop the clay bar because if you do it's unusable at that point. (I always keep spares)
    You can probably cover up the slight swirls with a good polish or wax. I've always beena big fan of Zaino's products and they even have a sealer that is quite good. (though admittedly I haven't used it in quite some time)

  3. #3
    Registered Member Ride92's Avatar

    2016 Mazda CX-5 GT AWD w/Tech & i-Activesense

    Join Date
    Mar 2009
    Location
    Menomonee Falls WI
    Posts
    1,626
    Polishing the paint isn't going to hurt anything unless you do it wrong or use the wrong products/pad/machine combo. If you're new to machine polishing I would stay away from a rotary polisher as they are very easy to burn thru the paint with and have a tendency to leave holograms in the paint. If you are on a budget the Harbor Freight 6" Dual action Polisher is actually a pretty decent machine and be had for cheap with a 20% off coupon. I would recommend changing to a 5" backing plate though as it's a bit under powdered for the 6" pads. A very easy to use setup would be Lake country or meguiars microfiber polishing pads and 3D HD speed one step polish for minor swirls. It's practically dust free and can be used in direct sun and still comes off very easy. If you plan on coating the car, then Carpro essence is another great polish that will also act as a primer for the coating to be applied.
    Just Giver!!!

Similar Threads

  1. Windshield polishing
    By Chris_Top_Her in forum CX-5 Accessories & Appearance
    Replies: 10
    Last Post: 05-01-2017, 03:01 PM
  2. Waxing VS. Polishing
    By MM3Canuck in forum Mazdaspeed3
    Replies: 19
    Last Post: 04-13-2007, 05:58 PM
  3. Car Polishing/Waxing...
    By clicknext in forum Mazda How-To
    Replies: 65
    Last Post: 09-19-2005, 12:08 AM
  4. polishing tips?
    By Lt. Dan in forum Mazda Protege
    Replies: 3
    Last Post: 11-11-2004, 06:56 AM
  5. polishing metal?
    By derrick1623 in forum Mazda Protege
    Replies: 5
    Last Post: 08-11-2003, 01:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •