Front and Rear Bumper Trims

:
2018 CX-9 Signature
Hi there,
New owner of a 2018 Signature Cx-9 and first post. I'm itching for my first mod and came across these bumper trims from Mazdausa accessories. I tried searching here for previous posts but came up empty. Does anyone have them installed and was it difficult? Any pics with them on?

http://accessories.mazdausa.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10001&storeId=24601&categoryId=398288&parent_category_rn=398281&yearSelected=2018&modelSelected=vc254&modelName=2018+CX-9
https://www.tascaparts.com/oem-parts/mazda-bumper-trim-and-00008yn32

Thanks!
 
Hi there,
New owner of a 2018 Signature Cx-9 and first post. I'm itching for my first mod and came across these bumper trims from Mazdausa accessories. I tried searching here for previous posts but came up empty. Does anyone have them installed and was it difficult? Any pics with them on?

http://accessories.mazdausa.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10001&storeId=24601&categoryId=398288&parent_category_rn=398281&yearSelected=2018&modelSelected=vc254&modelName=2018+CX-9
https://www.tascaparts.com/oem-parts/mazda-bumper-trim-and-00008yn32

Thanks!
I've seen a thread on here about them I'm sure
 
Thanks for the link. I haven't decided on order them yet as I wanted to see a better close up picture of them installed. All the online photos were either taken from a distance or so small I couldn't make out the details of it.
With my color being snowflake white, I wanted something tasteful to break up some of the black plastic trim on the lower rear.
 
Yea seems pretty straight forward. I've installed body work accessories on previous cars and this doesn't appear to be difficult.
 
The trims arrived yesterday and I was able to spend 20 mins today to install both the front and rear trims. The installation was very easy with a some minor drilling to the underbody panels to attached the two extra trim clips. The only disappointment was the material is of ABS plastic. For price it should be at least of sheet metal or something.
a>

a>

a>
 
I ordered my cross bars from them through Amazon. They will be here today.
I just order my trailer wiring kit direct from them. Lower price than anywhere I could find it.
 
$339 is a good price if it includes shipping. On their website it states free shipping but excludes oversized items. Not sure if these items falls into that category.
 
Any where else to order the bumper trims? It seems to be out of stock for most if not all online shops
 
The trims are on quality hold from Mazda because the design is defective, per both the dealer and Mazda corporate. There is no ETA on when the updated accessory will be available. I found this out at our last service appointment whenI tried to get them replaced under warranty and they were unavailable. I just removed them from our 2018 Signature today, in fact, because they were falling off. Instead of using clips, they were designed with double stick tape which ends up falling off from exposure to dirt and heat.
 
Hi Chris, thanks for your reply. Can I buy your bumper trims that you had removed from your car?



The trims are on quality hold from Mazda because the design is defective, per both the dealer and Mazda corporate. There is no ETA on when the updated accessory will be available. I found this out at our last service appointment whenI tried to get them replaced under warranty and they were unavailable. I just removed them from our 2018 Signature today, in fact, because they were falling off. Instead of using clips, they were designed with double stick tape which ends up falling off from exposure to dirt and heat.
 

Latest posts

Back