Made in USA and Free Shipping on all orders shipped inside the US.
Made in USA and Free Shipping on all orders shipped inside the US.
Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: ABS light comes on above 110MPH

  1. #1
    Registered Member

    2003 Protegé5 manual

    Join Date
    Feb 2018
    Location
    SF Bay Area, California
    Posts
    27

    ABS light comes on above 110MPH

    So as the title says, if I get above 110 in my car, my ABS alight comes on, but stays off after I clear the code if I don’t get up to that speed. Is this normal in our cars?

  2. #2
    ......................... i12drivemyMP5's Avatar
    Donated: $5

    323F

    Join Date
    Apr 2005
    Location
    <---------------->
    Posts
    7,438
    I don't have ABS but the motor starts banging on the speed limiter around 115mph

  3. #3
    Registered Member

    2003 Protegé5 manual

    Join Date
    Feb 2018
    Location
    SF Bay Area, California
    Posts
    27
    There’s a speed governer??

  4. #4
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    There's some sort of rev limiter too.
    When I got my parts car, I put it upon blocks then started it and tromped it in neutral (just for shits and giggles... I wanted to see if it would blow up)

    At about 7,500 RPMs the engine would cut out.
    The Diagram Dude

  5. #5
    Registered Member

    2003 Protegé5 manual

    Join Date
    Feb 2018
    Location
    SF Bay Area, California
    Posts
    27
    But back to the original topic, any ideas why my ABS light is coming on?

  6. #6
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    Read your ABS code before you rub it out...

    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  7. #7
    ......................... i12drivemyMP5's Avatar
    Donated: $5

    323F

    Join Date
    Apr 2005
    Location
    <---------------->
    Posts
    7,438
    Quote Originally Posted by Anzi View Post
    There’s a speed governer??
    I have sport auto so I'm not sure of rpm differences at top speed being close to or at redline compared to manual trans, but the mine was not at redline at about 115mph when it started cutting out. Car had some left too, it got to that effortlessly. But I don't need it to be doing that...................hardly ever.
    Last edited by i12drivemyMP5; 04-15-2018 at 05:14 PM.

  8. #8
    Registered Member

    protege5

    Join Date
    May 2016
    Location
    GA
    Posts
    198
    maybe just keep it 109mph or less?

  9. #9
    2008.5 MGM MS3 rsvinylgraphics's Avatar
    Donated: $5


    Join Date
    Oct 2009
    Location
    Indiana
    Posts
    1,026
    Quote Originally Posted by pb4ugotobed View Post
    maybe just keep it 109mph or less?
    where is the fun in that?

  10. #10
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    Either way,...
    Tell us what code you're throwing !!

    I'm Curious !!
    Last edited by pcb; 04-16-2018 at 11:28 PM.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  11. #11
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    You may be throwing a space/time continuum code !!

    You may need a new Flux Capacitor !!

    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  12. #12
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  13. #13
    Registered Member

    2003 Protegé5 manual

    Join Date
    Feb 2018
    Location
    SF Bay Area, California
    Posts
    27
    The light isn’t on cause I cleared everything with a reader that doesn’t do ABS codes, but still clears them

  14. #14
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    Quote Originally Posted by Anzi View Post
    The light isn’t on cause I cleared everything with a reader that doesn’t do ABS codes, but still clears them
    If you were to read the codes before you rubbed them you may be able to find your problem...
    Short your TBS terminal to ground and your ABS light will pulse out your fault code...

  15. #15
    The Diagram Dude pcb's Avatar

    2002 mazda protege 5

    Join Date
    Jun 2011
    Location
    ontario, canada
    Posts
    3,757
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 23
    Last Post: 04-23-2018, 02:03 PM
  2. Replies: 0
    Last Post: 07-22-2014, 11:31 AM
  3. Tail light / fog light / amber light problem
    By THE Phen in forum Protege5
    Replies: 19
    Last Post: 06-16-2013, 04:14 PM
  4. Mazda3 110MPH on logging road in dark
    By MS Pro Codriver in forum Pics & Builds
    Replies: 26
    Last Post: 11-13-2008, 02:53 PM
  5. Replies: 6
    Last Post: 07-13-2008, 09:05 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •