CorkSport.com is MAZDA PERFORMANCE!
CorkSport.com is MAZDA PERFORMANCE!
Results 1 to 2 of 2

Thread: Rear Strut ABS Sensor Bolt Size?

  1. #1
    Registered Member

    Protege5

    Join Date
    Jun 2006
    Location
    Denver, CO
    Posts
    93

    Rear Strut ABS Sensor Bolt Size?

    I recall breaking the head of one of these screws on the rear strut last time I replaced the strut housing and it's due time to replace that strut again, but I was not able to get the remainder of the old bolt out. Does anyone know a part number of size/pitch for this bolt so I can order a new one to use with the new strut? The one on the other side is not wanting to budge and I don't want to snap that one as well. Already tried heat and PB Blaster overnight but it seems to be rusted on fairly intently. Last time I did this, I just welded the sensor onto the strut body with a tack, but I'd like to not do that again obviously!
    Regards,
    Zach

    --------------
    2002 Protege5

  2. #2
    Registered Member

    Protege5

    Join Date
    Jun 2006
    Location
    Denver, CO
    Posts
    93
    It appears, after stumbling across a post that didn't appear in my search parameters earlier, that it is M8x1.25, however, I am not sure the length. Might want to get a 20mm or 25mm and cut it down to be safe.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

Similar Threads

  1. plug bolt size for rear caliper adjustment screw
    By BlueBomber in forum Protege5
    Replies: 2
    Last Post: 11-22-2015, 03:40 AM
  2. Can not get endlink bolt out of strut!
    By Foolish in forum Mazda Protege
    Replies: 1
    Last Post: 11-29-2014, 04:20 PM
  3. Rear Sway bar bolt size?
    By jason10phan in forum Mazda5 Engine & Transmission
    Replies: 3
    Last Post: 03-23-2011, 09:37 AM
  4. bolt size for strut to hub?
    By nlinesk8s in forum Mazda Protege
    Replies: 3
    Last Post: 09-02-2010, 05:42 PM
  5. rear abs sensors, bolt size?
    By rs39 in forum Mazda Protege
    Replies: 2
    Last Post: 07-23-2008, 10:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •