MSP Performance Parts - Steedspeed, PEP, Fidanza, Brakes, etc.

I recently sold my MP3 Turbo, so I have no need for the various parts I've been hanging onto.

Prices do NOT include shipping. Please PM or text me at 319-296-5280 with your zip code for a shipping quote.

Items Remaining as of 12/8/2018 - NEW PRICE DROP!!

10. Silicone Couplers w/ T Clamps - $10

11. Cluster bezel - free, pay shipping

12. Keyfob - free, pay shipping

14. Prosport boost gauge solenoid - free, pay shipping



Photo%20Feb%2005,%205%2022%2027%20PM.jpg


Photo%20Feb%2005,%205%2022%2042%20PM.jpg


Photo%20Feb%2005,%205%2022%2049%20PM.jpg


Photo%20Feb%2005,%205%2024%2012%20PM.jpg


Photo%20Feb%2005,%205%2025%2004%20PM.jpg


Photo%20Feb%2005,%207%2034%2033%20PM.jpg



1. Steedspeed T2 manifold - NEW!! - $600 *SOLD*
I bought this close to 8 years ago, it was one of Steed's last orders before production stopped. It has the EGR bung and additional ceramic coating to keep it looking new forever. Will come with OEM Mazda gaskets for both sides, plus studs and nuts for installation.

2. PEP 3" Downpipe - NEW!! - $390 *SOLD*
Got this during one of Pope's early Group Buys. It has the flex pipe, and will come with both gaskets, thermostat spacer w/ gaskets, hardware, PLUS a Grimmspeed 3" to 2.5" adapter with gasket. I intended on using this with a 2.5" catback until I could upgrade to full 3" and the Grimm adapter allows this no problem. Read more about it here.

3. ATP 6 psi WGA - $35*SOLD*

4. Fidanza 7.5 lb Lightweight Performance Flywheel - Less than 10K miles - $190 *SOLD*
Bought from an old friend and forum member, Khaosman. He blew his engine and sold his P5-T, and I picked this up from him along with an ACT HD Clutch. Clutch is sold but FW is still available. This will make your engine rev faster due to lighter weight and lower spinning mass. Sold as is. Would recommend resurfacing mating surface if installing with new clutch.

5. Mazda6 Front BBK Upgrade - $230 *SOLD*
This is a nice economical way of doing big brakes on the Protege using OEM Mazda parts. Got the Calipers w/ brackets from a local junkyard off a car with 65K miles. Will come with NEW Centric rotors and PosiQuiet low dust brake pads.

6. MSP Rear BBK Upgrade - $190 *SOLD*
Only an upgrade for non-MSP models obviously, but another cheap brake upgrade for the Protege. Only way to get bigger calipers without dishing out thousands is with the MS6 upgrade. Also got Calipers w/ brackets from a junkyard but not sure of mileage. Will also come with NEW Centric rotors and PosiQuiet low dust brake pads.

BUY THE ENTIRE BRAKE PACKAGE FOR $390 *SOLD* - Will include all items for a full front brake setup (brackets, calipers, rotors, pads), and full rear setup (brackets, calipers, rotors, pads).

7. 03.5 MSP Racing Hart 17x7 wheel - $30 *SOLD*
Got this as a full sized spare but never got around to putting a tire on it. In great condition, has a few curb rashes on the lip from previous owner but is perfectly straight.

8. MSP Driver side floor mat - $30 *SOLD*

9. P5 upper grille - $25 *SOLD*

12. Corksport Bronzoil bushings - $30 *SOLD*
I have 5 total. 4 to be used for the shifter plus an extra.

13. LX tan A-pillars - free, pay shipping *SOLD*

15. Stock MP3 wiper stalk - free, pay shipping *SOLD*

16. P5 radiator hoses, upper one cut for temp gauge - free, pay shipping *SOLD*

17. P5 brake booster line, cut for vacuum manifold - free, pay shipping *SOLD*

18. Lower steering column cover - free, pay shipping *SOLD*
 

Attachments

  • Photo Jan 20, 10 52 22 AM.jpg
    Photo Jan 20, 10 52 22 AM.jpg
    47.5 KB · Views: 1,942
  • Photo Jan 20, 10 53 00 AM.jpg
    Photo Jan 20, 10 53 00 AM.jpg
    69.3 KB · Views: 1,928
  • Photo Jan 20, 10 53 16 AM.jpg
    Photo Jan 20, 10 53 16 AM.jpg
    64.7 KB · Views: 1,941
Last edited:
Sold some stuff, and lowered prices on remaining items.

Can't believe no one wants that MSP Floor mat.. I remember those used to be in such high demand back in the day. Especially the 03 MSP ones with the stitching. Oh well.. bump for more sales :)
 
Last edited:
MSP floor mat sold

Lots of interest in Pope downpipe but no payment, so first to pay gets it.
It's brand spankin' new with a complete set of hardware, thermostat adapter, and gaskets, plus an adapter to mate up to a 2.5" midpipe in case you don't have $$$ to go 3" all the way to the end. Altogether this package is >$600 retail so at $390 it's a steal considering my parts are still new and unused. No different than buying from Pope himself..
 
Interested in the WGA and the key fob. Can't tell from the pic, will the key fob work with the MSP?
 
Interested in the WGA and the key fob. Can't tell from the pic, will the key fob work with the MSP?

Im not entirely sure, but I would assume yes. Im not aware of a difference between MSP and non-MSP keyfobs. I can take closer pics if that will help.
 
Yes, please. It's not an expensive part, but I want to make sure it's right. Also, did the center caps sell? I'm kicking myself about that flywheel. My transmission went back in on Friday and it would've been so easy to swap it out!
 
Flywheel sold, bump for moving the rest of this stuff.

Would love to make someone a great deal on that MZ6/MSP brake package! Comes with everything you need to upgrade both the front and rear of a non-MSP Protege, or just the front of a MSP.
 
Brakes just sold as well, Im down to only the spare 03.5 wheel, grille, and silicon couplers.

The 03.5 wheel would make for a great full sized spare, and is in really good overall condition. A few scuffs, but its perfectly straight.
 
Brakes just sold as well, Im down to only the spare 03.5 wheel, grille, and silicon couplers.

The 03.5 wheel would make for a great full sized spare, and is in really good overall condition. A few scuffs, but its perfectly straight.


Rear MSP Sub deck still available? I don't see where you mentioned it was sold.
 
Back