Help!!!

ehernandez

Member
:
2003 Mazda Protege 5
Hey im pretty new to this forum but i have a 03 MP5 and 5 codes have came up on my car

P0660
P0113
P0102
P0103
P0171

I dont know what to do at this point i have changed the maf sensor, spark plugs, and spark plug wires im lost on what to do I did recently just also install an intake. please help
 
When you put the intake in did you reset the ECU?

To do so:
take the negative battery cable off.
Pump the brakes a couple times to drain any charge in the capacitors
Wait 10 min
put the battery cable back on and start the car
Let it idle for another 10 min.

Good luck!
 
Check your connections and your wiring harness leading to the MAF and IAT. Make sure everything is plugged in.

All of those codes relate to the intake you put in.
Even the VICS circuit malfunction (P0660) maybe in the same wiring harness.
 
Back