Hello everyone,

I'm installing a remote start/alarm on my 2017 CX-9 and having an issue with the parking light signal.

The paperwork I have lists it as pins 1&2 on the connector at the light switch and colors blue/black. When I get to this point, I don't find those color wires and the wires in pins 1&2 have a constant 12V that does not change when the parking lights are turned on/off.

If anyone has access to an actual Mazda wiring diagram or manual and could provide some support it would be greatly appreciated.

Image from the install paperwork is attached.Parking light wires.JPG


Thanks in advance for any help.