Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22

Thread: Cargo Illumination LED

  1. #16
    Registered Member

    CX-5 Touring w/Premium

    Join Date
    Jul 2018
    Location
    KPTK
    Posts
    16
    I bought battery powered, LED, stick-on, tap on/off lights. Many choices on Amazon. Cheap. Easy install.

  2. #17
    Registered Member

    cx-5

    Join Date
    Sep 2014
    Location
    United States
    Posts
    19
    Thanks for the wireup, has just finished wiring my Cx-5, as a heads up for users looking to do the same, I would advise using the 4 strand wire and doing a parallel led hookup with 3 out of the 4 outgoing wires used to hook up the farther leds on the top right, top left and lower left and the last wire to return to ground. The reason I decided to do a parallel hookup instead of the series version by op is due to the fact that in series, the leds would have a decay factor for each additional led and output varying lumens. Also for the final note, if I had to do it again, I definitely would have opted for a larger push switch, the 16mm is just an odd size and even with smaller fingers you will have a hard time depressing the switch all the way.

  3. #18
    Registered Member

    2018 Mazda CX-5 GT

    Join Date
    Sep 2018
    Location
    Seattle
    Posts
    11

    I'm curious how you did it

    Quote Originally Posted by gman35124 View Post
    I did and can give an update on installation once I have the time to do it.
    Eagerly awaiting for your update on installation :-) It looks like you have to cut into the plastic

    (first post)

  4. #19
    Registered Member

    247

    Join Date
    Nov 2018
    Location
    IL
    Posts
    7
    any new updates on this?

  5. #20
    Registered Member ddtigger1's Avatar

    2016.5 Mazda CX 5 Grand Touring W/ Tech PKG

    Join Date
    Aug 2016
    Location
    Portland, Oregon
    Posts
    289
    Yes, I cut/drilled into the plastic.. before I did I checked the price of replacement if I messed it up..

  6. #21
    Registered Member

    CX5

    Join Date
    Feb 2019
    Location
    Cupertino
    Posts
    8
    Quote Originally Posted by gman35124 View Post
    I did and can give an update on installation once I have the time to do it.

    Also FYI I actually requested they make the part available on their site by using their contact page https://www.nengun.com/enquiry/ and the option "I'm looking for a part not listed on the website"

    The turnaround was pretty quick as they listed the part within a week

    If you're looking for other OEM parts not available in NA you can look at the JP accessories PDF http://www2.mazda.co.jp/accessories/.../cx-5_1612.pdf

    Do you know where to get the installation manual for this?

  7. #22
    Registered Member

    1963 Mercedes 190Dc

    Join Date
    Feb 2019
    Location
    California
    Posts
    3
    Quote Originally Posted by ddtigger1 View Post
    Yes, I cut/drilled into the plastic.. before I did I checked the price of replacement if I messed it up..
    Love this. I always check after I mess something up.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Cargo Illumination (re - posting)
    By ddtigger1 in forum CX-5 General
    Replies: 4
    Last Post: 08-17-2017, 05:11 PM
  2. Cargo illumination
    By ddtigger1 in forum CX-5 General
    Replies: 1
    Last Post: 08-11-2017, 09:51 PM
  3. Replies: 5
    Last Post: 02-12-2016, 07:55 PM
  4. Order cargo cover and cargo tray from USA to use on Canadian model?
    By tim908 in forum CX-5 Accessories & Appearance
    Replies: 6
    Last Post: 05-11-2012, 04:13 PM
  5. Mazda5 OEM mats, Cargo net, Seat covers, Cargo Liner
    By hallfleming in forum Completed Transactions
    Replies: 3
    Last Post: 01-09-2007, 03:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •