praded2007
Member
- :
- 2.2 Diesel CX-5
Hi.
So. I installed a set of parts for MRCC on my car. There is no information about these processes. So I decided to ask here and share some problems.
Lets go! After installing the kit ((RADAR : GMM1-67-XA1, BRACKET FOR RADAR : KA0M-670XA2, EMBLEM : GHR6-51-730, EMBLEM BRACKET : KA0H-50-721 BUTTONS : I had it with LIM, Break light unit KA0M-67-YA0), it was required to "prescribe it into the configuration" of the dashboard as a minimum. I prescribed LIM earlier and it works perfectly. I have a scan + Forskan. But the LIM connection required only adding the corresponding button on the steering wheel and changing the auto configuration in line 720- ....
With the activation of MRCC, so far, there is a problem. I have constantly the error appeared (activated Forscan):
SBS / MRCC DTC U2300: 56-8A ===
Code: U2300 - Vehicle configuration
I have got VIN 2 German cars (they have + parking sensors in front and behind). I got 2 ASBUILT for them. I got asbuilt of my car too.
Additional symptom of malfunction for Mazda:
- Invalid / incompatible configuration
And ... almost deadlock, because there can be many options for solutions, including not fully configured IC (instrument panel) or the wrong number of at all by .
I compared asbuilt of my car and of two German cars. The German cars are twins in terms of configuration, but not with my car. My configuration is different in part: 7B7 ...., IC-720 ..., FSC-706 ..., F_BCM-726 ...., SSU-731 ..., RCM-737
I have not tried to apply their configuration to my car yet. This is the last step. But I want to ask those who have this function, auto 2015 restyle, how the panel behaves, if the icons from the MRCC system are displayed when the ignition is turned on. Can you post photos?
Perhaps there is a person who knows what Forscan is and can take out his config_cx_5.txt, the configurations RBCM 7B7 ...., IC-720 ..., FSC-706 ..., F_BCM-726 ...., SSU-731 ..., RCM-737
Can anyone have a thought by mistake SBS / MRCC DTC U2300: 56-8A?
So. I installed a set of parts for MRCC on my car. There is no information about these processes. So I decided to ask here and share some problems.
Lets go! After installing the kit ((RADAR : GMM1-67-XA1, BRACKET FOR RADAR : KA0M-670XA2, EMBLEM : GHR6-51-730, EMBLEM BRACKET : KA0H-50-721 BUTTONS : I had it with LIM, Break light unit KA0M-67-YA0), it was required to "prescribe it into the configuration" of the dashboard as a minimum. I prescribed LIM earlier and it works perfectly. I have a scan + Forskan. But the LIM connection required only adding the corresponding button on the steering wheel and changing the auto configuration in line 720- ....
With the activation of MRCC, so far, there is a problem. I have constantly the error appeared (activated Forscan):
SBS / MRCC DTC U2300: 56-8A ===
Code: U2300 - Vehicle configuration
I have got VIN 2 German cars (they have + parking sensors in front and behind). I got 2 ASBUILT for them. I got asbuilt of my car too.
Additional symptom of malfunction for Mazda:
- Invalid / incompatible configuration
And ... almost deadlock, because there can be many options for solutions, including not fully configured IC (instrument panel) or the wrong number of at all by .
I compared asbuilt of my car and of two German cars. The German cars are twins in terms of configuration, but not with my car. My configuration is different in part: 7B7 ...., IC-720 ..., FSC-706 ..., F_BCM-726 ...., SSU-731 ..., RCM-737
I have not tried to apply their configuration to my car yet. This is the last step. But I want to ask those who have this function, auto 2015 restyle, how the panel behaves, if the icons from the MRCC system are displayed when the ignition is turned on. Can you post photos?
Perhaps there is a person who knows what Forscan is and can take out his config_cx_5.txt, the configurations RBCM 7B7 ...., IC-720 ..., FSC-706 ..., F_BCM-726 ...., SSU-731 ..., RCM-737
Can anyone have a thought by mistake SBS / MRCC DTC U2300: 56-8A?