Looking great!
Which clear side markers (indicators) did you use? Looking to get rid of the orange look on my P5.
Installed a modified Nissan Tiida antenna. Also vinyl wrapped the roof in gloss black.
Painted the rear spoiler in gloss black to match roof. I plan on vinyl wrapping the rear spoiler in same black as the roof, and also the gap between where the roof ends and the spoiler in the same vinyl. Don't like how the red "patch" breaks up the colour. (unamused)
Installed FIAMM dual tone horns. They are LOUD! And also getting the car ready for my next mod. There's a hint to what it is in the pic. (shady)
HID projector retrofits?
now where did you get a MADAZ emblem? lol
Something I did before installing the headlights back on was notch a little off the panel so I could adjust beam horizontaly when the lights are in situ. Did this on both sides and painted body colour to stop potential rust from forming. See red arrow in photo below. You cannot adjust horizontal alignment when the lights are bolted on otherwise.
Didn't know that's how you adjust left-right. After looking at the post above by PCB, I had a look at my headlights and there's a plastic cover/cap of some sort where the screwdriver would go. That's probably why I didn't see the adjustment in the first place! (pissed)Yes you can from above with a long shanked phillips head screwdriver.
I used a 10mm socket from under the wheel arch to adjust left-right alignment.That notch is nowhere near where you put the screwdriver.
The crash bar (or lack of one) and power steering cooling lines are way different than the US cars. And you have city lights! And an ambient temp sensor (possibly for the climate control)