Last edited by Conrad 16.5; 03-22-2017 at 07:09 AM.
"Don't bother me with facts, Son. I've already made up my mind." -Foghorn Leghorn
Any torque user mind running the coolant temp pid on a drive and tell me the max temp it logged, and the approximate outside temp? thanks. I'm debating adding a small trans cooler from china into the grille and just wanted some comparison. I will be adding it for sure once the turboh is hooked up.
I did a check on the CX-5 yesterday. I'm not using Torque since it only works with android.
The blue light on the dash went off at 131f and the max temp that I saw yesterday (~40f) on a 30 minute drive was 190f.
Last edited by Chris_Top_Her; Today at 10:12 AM.
Last edited by madar; Today at 10:43 AM.
The (trans) oil cooler is connected to the trans and works by circulating trans fluid next to thebl coolant forna heat exchange. There is no actual external line for the fluid itself. The two 5/8 barbs are for coolant in/out. So also you would be helping reduce use of the fans. A lot of newer cars are using this method
Last edited by madar; Today at 12:47 PM.