ES to MSP Status build "Betsy"

I can see the first few pictures in the first post but none of the rest of them show up. The injectors are from the MSP or the ES? I believe the FP had different color injectors than the FS, which where purple and green.

small update, few more parts and goodies have come in, but been super busy with work and haven't had much time todo anything. managed to get some undercoating over that ugly rust. not the prettiest thing but its a lot better than it was. now onto some sheet metal fab. as you can see in one of the pictures.









MORE PARTS LOL OMG . 2003? or 3.5? date code 12/02 ,166k km . 600$ . 100% Stock, unmolested everything is there in and out. woohoo.

here are some more pictures of the 03.5 MSP. Started to tear into this and keep what is good, as you can see why I chose not to fix this chassis. this thing has some serious rot. what a shame.






















And this is how to please your wife .! hehe.

that rust is heartbreaking. im about to fluid film or por15 my entire car lol

OH I wish I do I do, If it was in the budget I would por15 my whole car too! lol, after I fix the rust and rubber coat the important areas ,I will use the rust check green goo for underneath and the Red for the interior as it smells nicer. Have got no where near that stage tho! So far ive been finishing off tearing all the good stuff off the MSP that will be used , sold or kept for a spare part. Cant have enuff spare parts right?!? .. But finding out I have to change the entire chassis harness except for the one going to the rear lighting, has put me behind a bit,. but nothing that cant be done in a few hours. . I think every single bolt and nut will be turned on Betsy (yippy).! , witch is a good thing imo. The MSP only having 160k km and nothing touched for so long, a lot of the bolts were seized and rusted hardcore. , I had swapped out the front spindles to 4 lug and the whole rear subframe to the es 4 lug setup , so it can still roll out to scrap. , But having no struts to toss in there is giving me a hassle keeping it up.!!!?? I don't want to send good struts to the scrap yard if I don't have too. ,


more pictures of the current state. Check that Hovercraft Fitmint!


hmmmm , remove what?!
install this. ok!?







Hurry and finish your "Race car uncle Todd!"