Actually we in the US have true "manual" folding outside mirrors and you have "power" folding outside mirrors! Since you already have power folding outside mirrors, this module from AliExpress seems to be the only part you need to make them "auto" folding when you lock the door and "auto" unfolding when you unlock the door even with Auto Lock.Hi, I have a base model CX5 2016 model I can turn the switch on the door and fold the mirrors in but was wondering if anyone has found a way to have them auto fold when ignition off
thanks
Looks like the $30 USD AliExpress kit is very similar to Mazda Euro OEM Auto Folding Mirror Kit C850V7650A for ~ ⅓ of the price and pay no expensive shipping. kiln in South Africa which has right-hand-drive CX-5 had successfully added the Auto Power Folding Mirrors function with "crappy Chinese garbage parts from shady Aliexpress" (mind you there're many Mazda parts aren't made in Japan, many are made in China and the OEM filter in the US for CX-5 now is made in Thailand!):My car came equipped with power folding mirros and i just had to add the mazda kit C850V7650A.
After that the car everytime i lock the car the mirrors will fold an then unfold back when i hit the start button to AC power.
Note: the kit i bought was from europe and the instructions where a bit different than the wiring my car has. So i had to figure out a few cables, not the hardest thing in the world but it was not straight forward for my case.
Update:
I have ordered this module: https://www.aliexpress.com/item/Car-Auto-Side-Mirrors-Folder-Folding-Spread-Kit-For-Mazda-CX-5-With-Electric-Folding-Mirror/32698267069.html
Instructions related to a 2016.5 CX-5, Right Hand Drive vehicle.
The module arrived and with the included instructions as well as instructions from ImVKool, it was Plug & Play with only 3 wires to splice into: a) Constant +12v supply feed, b) Door open signal wire, activated from remote and c) Door close signal wire, activated from remote.
a) +12v picked up from Red/Yellow wire on the main plug to power window module in the door(below the power mirror/fold switch connector).
b) Door open signal picked up from harness connected across door striker, on the Blue/Orange wire.
c) Door close signal picked up from the same harness as b), on the Pink wire.
Unit and harness tucked away pretty easy and fitment took about 30 minutes including removal of door panel, locating wires and re-install door panel.
Results is pretty good and the mirrors fold when car locks from remote or auto locking the doors when walking away(setup on infotainment system). Opening when car is unlocked from either remote or door(advanced keyless entry system factory fitted). Adding real value to the KODO design, by owner......
Tanks to everyone with advice, criticism, suggestions and motivation(ImVKool).
My car came equipped with power folding mirros and i just had to add the mazda kit C850V7650A.
After that the car everytime i lock the car the mirrors will fold an then unfold back when i hit the start button to AC power.
Note: the kit i bought was from europe and the instructions where a bit different than the wiring my car has. So i had to figure out a few cables, not the hardest thing in the world but it was not straight forward for my case.
Sent from my SM-G935F using Tapatalk
If you bought the kit, it comes with all the wiring instructions you're going to need. As i said before in my case my car was shipped to latin america and this kit is for euro cx5's so i had to make a few ajustments.Hi Joaks,
I am going to install this kit as well, can you tell me which wires do I have to find and connect to this kit?
Thanks
If you bought the kit, it comes with all the wiring instructions you're going to need. As i said before in my case my car was shipped to latin america and this kit is for euro cx5's so i had to make a few ajustments.
I dont own the car anymore hence i dont have the instructions with the corrections i made for my specific case, but as far as i can remeber there a few wires backwards in my car and switching them over on the kit fixed the issue.
Last one should be unlock wire. In my case the mirros closed when the lock was triggered but they will open when the car was on acc. I did test them to open on unlock but never made the change.Yeah in my case my car was shipped to Indonesia and instruction from this kit is a little bit different from my car wiring than it said in the wiring instruction, so I guess I have to make a correction of which wire I have to connect to the kit, if you still remember, there are six wires to connect, I have found five function but one wire still mystery to me.
I have found:
Positive Wire
ON/ACC Wire
Negative / Ground Wire
Mirror Switch Wire
Door Lock Wire
Only one more, if you still remember can you tell me which wire is it?
This is for gen 1. I now have a gen 2 and it came from factory with the option.Is this the same for gen 2? It should matter if its left or right game drive?
My car came equipped with power folding mirros and i just had to add the mazda kit C850V7650A.
After that the car everytime i lock the car the mirrors will fold an then unfold back when i hit the start button to AC power.
Note: the kit i bought was from europe and the instructions where a bit different than the wiring my car has. So i had to figure out a few cables, not the hardest thing in the world but it was not straight forward for my case.
Sent from my SM-G935F using Tapatalk
Hi Valerossi I too have the oem kit from europe any help to identify which colour wires go where for australian wired CX5 would be appreciated. Diagrams, photos, pin connections?