Interior mood lighting

DeluxePromo

Member
:
Cx-5
More photos to come, the lights come with a remote that has about 10 diffrent setting including: decrease / increase brightness, fade diffrent colors that is adjustable, jump to music (works better if you have a subwoofer), and about a couple colors to choose from (will get photo of remote)

31b91bbd4816e2d588f0f1fecc998978.jpg
c89a778ac02745e1725d68317b8753cb.jpg
29b7fad9029d23e6d9be655085893224.jpg
1b6649c34544afad67ff9c2c3d75f725.jpg
728f251e246bc59b6998056564bbfe89.jpg
8a58cc8917f29aaa1eb3ac3736045980.jpg
6c1ef8c9624b24df78e1757a76310d0f.jpg
e8a21bc62f214ae81bf23561dc832b8f.jpg
dad57c12182a94bad281b2b0404452fe.jpg
4a8392fe5a181145d4181e431b500764.jpg
343fb1877ed14f55730c5e10d50c9286.jpg
a1e8cc3089b073139c1ff156c03e4359.jpg
6d8c33056ceae96d0c5896e7afc7e406.jpg
 
Last edited:
Looks Kool [emoji41], I would have to see it live, to see if it would be disturbing for me while sitting and driving, or is it welcome light only on if the door is open? I use the same remote for 2,50$ from Ali, have you cut the LED stripe from a roll and tape them with 3M or are these already fix moduls. Nice job-I like!!

Regards 101
Sent from my iPad using Tapatalk
 
During driving if you don't have it too bright during the nighttime it's not bad at all. There are 16 brightness setting so plenty of options. Only thing I had to do is peel the 3m tape and connect everything this. I'll upload pics of how I show bacidly no visible wires.
 
image_zpss6l1yedu.jpeg
[/URL][/IMG]
image_zpsh5xsrsxv.jpeg
[/URL][/IMG]
This is my welcome light- it is only shining when the the door is open. Next I will work on the ambiente light but with single LED's I think-starting on the middle console. I like your Idea/the effect at the doors very much and I have a lot LED stripe left over, maybe I will try.

Regards 101
 
Last edited:
image_zpss6l1yedu.jpeg
[/URL][/IMG]
image_zpsh5xsrsxv.jpeg
[/URL][/IMG]
This is my welcome light- it is only shining when the the door is open. Next I will work on the ambiente light but with single LED's I think-starting on the middle console. I like your Idea/the effect at the doors very much and I have a lot LED stripe left over, maybe I will try.

Regards 101
Awsome really like what your did! Thanks for the comment, good luck sir.


Sent from my SM-G930V using Tapatalk
 
Thanks- same to you[emoji4]


Sent from my iPad using Tapatalk
 
image_zpss6l1yedu.jpeg
[/URL][/IMG]
image_zpsh5xsrsxv.jpeg
[/URL][/IMG]
This is my welcome light- it is only shining when the the door is open. Next I will work on the ambiente light but with single LED's I think-starting on the middle console. I like your Idea/the effect at the doors very much and I have a lot LED stripe left over, maybe I will try.

Regards 101

How did you add those?
 
The LED stripe is glued with 3M tape on the edge of the plastic cover above the legarea-the LED stripe is connected to a LED color module with remote from Ali for maybe 4$ wich then is connected with wires to the back of the car (driver side) to get the energy from the RBCM. Hope that helps.

Here is a new Idea I got from a friend last weekend!! So cool!
1aba20c5705722d16cbfbaff8cf642fe.jpg

87e6b75dbbda1d8702cd2cc08d276319.jpg


Cheers 101
 
Last edited:
The LED stripe is glued with 3M tape on the edge of the plastic cover above the legarea-the LED stripe is connected to a LED color module with remote from Ali for maybe 4$ wich then is connected with wires to the back of the car (driver side) to get the energy from the RBCM. Hope that helps.

Here is a new Idea I got from a friend last weekend!! So cool!
1aba20c5705722d16cbfbaff8cf642fe.jpg

87e6b75dbbda1d8702cd2cc08d276319.jpg


Cheers 101
Exactly what i want to do. Can u link me etc? How hard and how did you wire it into the door?

Sent from my SM-G930V using Tapatalk
 
Exactly what i want to do. Can u link me etc? How hard and how did you wire it into the door?

Sent from my SM-G930V using Tapatalk

It's a shining plastic wire for led use you can get a role 5m or 25m then cut it the length you need. You can decide the color of your led's yourself. You need two-one on each end. The plastic wire is just pressed into the slot of the door and the connection with the wires is hidden behind(inside the door).
The connection to electricity we figure out next time because we want it to shine all the time not only for welcome.
I will let you guys know then!

Cheers 101
 
Back