Update:
I have ordered this module:
https://www.aliexpress.com/item/Car-Auto-Side-Mirrors-Folder-Folding-Spread-Kit-For-Mazda-CX-5-With-Electric-Folding-Mirror/32698267069.html
Instructions related to a 2016.5 CX-5, Right Hand Drive vehicle.
The module arrived and with the included instructions as well as instructions from ImVKool, it was Plug & Play with only 3 wires to splice into:
a) Constant +12v supply feed,
b) Door open signal wire, activated from remote and
c) Door close signal wire, activated from remote.
a) +12v picked up from
Red/
Yellow wire on the main plug to power window module in the door(below the power mirror/fold switch connector).
b) Door open signal picked up from harness connected across door striker, on the
Blue/
Orange wire.
c) Door close signal picked up from the same harness as b), on the
Pink wire.
Unit and harness tucked away pretty easy and fitment took about 30 minutes including removal of door panel, locating wires and re-install door panel.
Results is pretty good and the mirrors fold when car locks from remote or auto locking the doors when walking away(setup on infotainment system). Opening when car is unlocked from either remote or door(advanced keyless entry system factory fitted). Adding real value to the KODO design, by owner......
Tanks to everyone with advice, criticism, suggestions and motivation(ImVKool).