Hey guys,
I am in need of some help! I was driving home from work and noticed a bunch of steam coming from my engine bay. I saw that the temp gauge was maxed out so I quickly got it parked somewhere to let it cool off. The coolant in the reservoir was boiling like mad and there was coolant everywhere, due to my reservoir being cracked. I let it cool for about 30 mins and drove it back home (2 miles) with the temp gauge at normal until I was directly in front of my house. I decided to see if my fans were on so I turned on the AC. Only the main (driver's side) fan turned on, the passenger fan did not turn on at all. I thought this fan turns on with the AC? My AC was not blowing cold at all and usually does within a few seconds. I let it run for a couple minutes like this and the fan never turned on. What's the best way of testing the fan? Could my thermostat cause the fan to not turn on? Any help is appreciated.
I am in need of some help! I was driving home from work and noticed a bunch of steam coming from my engine bay. I saw that the temp gauge was maxed out so I quickly got it parked somewhere to let it cool off. The coolant in the reservoir was boiling like mad and there was coolant everywhere, due to my reservoir being cracked. I let it cool for about 30 mins and drove it back home (2 miles) with the temp gauge at normal until I was directly in front of my house. I decided to see if my fans were on so I turned on the AC. Only the main (driver's side) fan turned on, the passenger fan did not turn on at all. I thought this fan turns on with the AC? My AC was not blowing cold at all and usually does within a few seconds. I let it run for a couple minutes like this and the fan never turned on. What's the best way of testing the fan? Could my thermostat cause the fan to not turn on? Any help is appreciated.