You are using the Flintstone brake?
https://www.youtube.com/watch?v=skeg3Y6sptg
https://www.youtube.com/watch?v=skeg3Y6sptg
For CX-5 we have to add 2 additional factors:
1. Sticking caliper pins due to lack of lubrication from factory.
2. Sticking rear calipers with Electrical Parking Brake due to improper tolerance on rear calipers with EPB.
These 2 are well known issues on CX-5 which will make your brake pads wearing out really fast!
I just don't understand, why they don't increase the size of the rear brake pads and calipers.
Hi,
My cx5 is now 80000 km and had 5mm left for past 8 months. 80% city. Will wait another 6 month to see if we need to replace pads.
Is new rotor is better or resurface is sufficient?
2016.5 CX-5. Replaced both rear pads and rotors at 22,400 miles. Showed the advisor the TSB regarding the parking brake, they said there's nothing wrong with the calipers or parking brake. https://photos.app.goo.gl/7LazA2rwgUvJd1Fq8
Don't believe there's any low pads warning sensor or simple build-in metal tab on OEM pads.Do we have any warning, when the brake pads go low? Like metal tab touching the disks, or something similar?