Mazda of the Month | ENTER NOW for May!

Status
Not open for further replies.

Antoine

Administrator

Please note the following rules & guidelines.
Your cooperation and participation would be greatly appreciated, thank you.​

ENTRY RULES:

* You must own the Mazda you are entering into the contest

* Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc

* If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered

* Once you have entered (posted) your Mazda, you may not withdraw from the contest

* The MOTM contest & rules are subject to change in order to maintain a fair & fun environment for the Mazdas247 Community

ENTRY REQUIREMENTS:

1. Username
2. Name
3. Year and Model
4. Minimum 2 pics / Maximum 5 pics of your Mazda *NO ATTACHMENTS PLEASE!
5. List of CURRENT modifications *NO "WAITING TO BE INSTALLED" MODS PLEASE!

--------------------------------------

EXAMPLE:

Antoine
Antoine *
1995 Eunos Cosmo

3034361674_7fc3f75417_z.jpg


3190674418_cc35ac2a4c_z.jpg


3816167695_72f391b493_z.jpg


- Hi-Per Coolant
- Redline Diff Oil
- Autoexe Intake
- Autoexe Springs
- Volk Racing Rims
- HKS F-CON V Pro
- Redline Tranny Fluid
- Titanium Intake Pipe
- HKS Boost Controller
- MAZDASPEED Exhaust
- Speedmaster Engine Oil
- Optional Factory Aerokit
- Paint Protection Coating
- Carbing Front Strut Brace
- Autoexe Spark Plug Wires
- Alpine Navigation Headunit
- Yokohama DNA S.drive Tires
- Defi Boost Gauge & OLED Display
- Upgraded Original Headlights (HID)
- Carbing Cooling Plate (not pictured)
- Custom Center Console and Glovebox

--------------------------------------

PRIZES:

Provided by the International Motor Sports Association | IMSA.com

* Hot Pass for Winner and Guest at one of the Winner's choice of TUDOR Championship races in 2015

* Behind the Scenes Tour including being on the Starting Grid for the race, Transporter Tours and a visit to Race Control

* Exclusive Pit Lane access during race

Many thanks to the IMSA | TUDOR United SportsCar Championship for this fantastic prize!

In addition to...

+ Free Basic Custom Shift Boot * Boot compatible with NA & NB Miata, Gen 1 and 2 RX-8, Gen1 and 2 MAZDASPEED3 / Mazda3, 3rd Gen Protege and MAZDASPEED6 / Gen1 Mazda6 * OR + 20% of next purchase up to $200 THANKS TO FattiMotorWorks.com

+ Your Mazda showcased on the Mazdas247 Home Page!

+ A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!

-> Sponsor a Future MOTM...PM Antoine for details!

VOTING RULES:

* Votes only count for the MOTM from those Members that have joined Mazdas247 during the previous month or before

* There is NO tolerance for PERSONAL CAMPAIGNING threads, posts, private messages (PMs), images or links (including signature and or image links). The creation of such ANYWHERE on or off the Internet including Mazdas247 will result in immediate disqualification...If you are disqualified, your entry & poll listing WILL remain but your votes will be removed

* Creating GENERAL "Vote for the MOTM" threads and links is allowed and encouraged

GOOD LUCK AND HAVE FUN!
 
This month's theme is...

Rotary Powered Mazdas | Calling all Mazdas with Rotary Engines!

PLEASE DO NOT ENTER if your Mazda does not match the above theme, thank you!

DEADLINE to ENTER is May 20th '15!

NOTE: Please keep this thread ON TOPIC.

Thank you and once again, good luck!
 
Hmmm has everyone gone SKYACTIV? No one has a rotary-powered Mazda besides myself?

Seriously...Please spread the word people or we won't have a MOTM for MAY!
 
Looks like we won't have a MOTM for May then...Perhaps I should stop the MOTM completely... :(


Sent from my iPhone using Tapatalk
 
denim
Aaron Houston Clinton

2005 Shinka #988

20% Tint
HKS AF
TurboXS Exhaust
TurboXS Header
TurboXS Cat pipe
GarageLine spacers
Enkei 17x9
Toyo R1R 255
Eibach ProKit springs
BHR Ignition
Tokico SpecD adjustable shocks
EZ-Lip











bumpstops and RB sways are on the way soon...
 
eprx799
Marc Porschke
1983 Mazda RX-7 E Production racecar
Exterior:
ISC racing wide body
fiberglass front/ rear fenders
fiberglass hood
fiberglass front bumper
Lexan rear windows
Gutted factory doors

Interior:
Full custom roll cage
Custom gauge panel
Momo Steering wheel
Sparco EVOII race seat
Wilwood pedals
Fuel Safe fuel cell
Custom wiring (Thanks Evan!)

Drive line:
Streetport 12A rotary
Weber IDA carb.
Tilton Clutch
Mazda Speed 2 piece exhaust
Rotary Shack Max power header
Custom 3" Stainless steel exhaust with Burns Stainless muffler ( Thanks Niles!)

Aluminum Rad
Fluidine Oil cooler w/ custom Aeroquip lines
Custom ducting for oil cooler and rad

Suspension:
Front
Ground Control camber plates
unknown coilovers came with the car
Eibach springs
Advance Design dual adjustable struts
G force eng. turn in spacers
KC Raceware 2 piece brake rotors
MazdaSpeed brake ducts
Aeroquip brake lines

Rear:
G force Eng. Panhard bar
G force Eng. Tri link
Advance Design dual adjustable shocks
Eibach springs

Panasport wheels 15x7
Hoosier 215/580 r !5 race slicks


8BC50A25-3EAB-4CDD-BA70-D766C8BE20C1_zps71wcpkvc.jpg


090C740D-BF9C-4ECE-A7AF-898699E6B3A2_zps7pmq2f9p.jpg


4C90E8CC-97EE-42D0-8E37-3D421802205F_zps8dwjjbxz.jpg


DB4F55A4-6E8C-4284-8858-ECDF5F4A83F5_zpsqlqr8xjx.jpg


49DF950B-4826-4540-9640-B96FE85DA48E_zpsdlkw0vgq.jpg
 
Oh Snap! Awesome out of the woodwork entries...Bring it on!

Deadline extended to May 20th and long live Rotary-Power!


Sent from my iPhone using Tapatalk
 
mymmeryloss

Chris Gilder

1992 Mazda B2600i

2d76e8f3c18a5d4a7600df2cd8992fde.jpg


8b09b8a749c802f2eac1c76f49208ed6.jpg


7ea4f569cee10b83b3f09bbac683a191.jpg


10da36ca07ee743424037ca5954aa27c.jpg


556f0eda210707e1417b7a4c5962c8b2.jpg


Mod list:

Engine:
Jdm s5 TII 13b
Streetported and blueprinted
Goopy seals
Custom stainless turbo mani
FD uim
FEED adapter
AEM fpr with aeromotive gauge
Comp Turbo TO4E
Tial wastegate
Tial bov
Greddy elbow
All emissions deleted
AEM smart coils
Xtreme Rotaries gilmer drive kit
Xtreme Rotaries alt relocation kit
-16 AN radiator hoses
Exedy stage 2 clutch
Custom lms-efi milspec harness
1320 shifter extension
Custom 3" driveshaft
Himni Racing engine dress up kit
ID 2000 secondaries
AEM EMS series one standalone
Votionspeed intercooler
10 row oilcooler
-10 AN stainless oil cooler lines
-10 AN turbo drain
-6 AN braided fuel lines
Rotary Works aluminum radiator
Greddy oil pedestal
Greddy radiator cap
Scirocco flexalite dual fans



Chassis and suspension:
Full custom one off CNC frame
Ford 8.8 irs
Custom front and rear control arms w/uniballs
Torsion bar bag setup
Slam Specialties RE7's on all 4 corners
Spun aluminum fuel cell
Seamless aluminum air tank
2 Viair 444 black series compressors
Walbro 255 fuel pump
Aeromotive fuel pump wiring kit
Kinetik HC battery
Custom battery box under dash
Unibody
Body dropped 5 1/2" to the doors
Shaved and beadrolled firewall
Shaved and beadrolled bedsides
Shaved and beadrolled back cab wall
Frame runs through cab and is center console
Tilton floor mount pedal setup
Rhd conversion
Rhd FC RX7 dash
Keys Racing steering wheel
Custom cnc floor with shaved flat underside
Rx7 seats
Custom seat rails
Custom engine mounts
Custom trans mount
Custom mounted Ford Ranger headlights
Clear corners
Ford Ranger bumper
Custom bead rolled roll pan
Sectioned rear panels
Tig welded everything
5 lug conversion
Toyota drop spindles
Custom radiator support
Geo Metro rack and pinion
Custom rack mount
Dirt track steering arms
AEM truboost gauge
AEM volt gauge
AEM oil temp
AEM uego
AEM water temp
Custom rhd pillar pod
Dash gauge pod

18x8 F BBS reps
18x9 R BBS reps
205/40/18
Drilled and slotted rotors

Pretty much custom everything. Im sure i missed a ton.
 
Last edited:
Status
Not open for further replies.

Latest posts

Back