Hey guys!
I'm working on a project to connect 2 amps to the standard radio in CX-5 and need to know the pinout of connectors at the back of the radio unit.
So here is the picture of the connectors:
https://g-a.d-cd.net/d43189u-960.jpg
can anybody share a list of signals on each of these connectors? I find a lot of information about CX-7 units and almost nothing about CX-5. Any help is appreciated!
P.S. By the way if anyone is interested in wiring out Line-Out signals (low-level) then this post might be useful for you. It's in Russian but everything is pretty obvious on the pictures there. You can take 2 or 4 special microphone cables like Belsis BW7824 (one of the cheapest) and solder one of the cable's wire to a capacitor's pad, and another wire to a solid Ground on that PCB. Of course you also need RCA connectors (female).
I'm working on a project to connect 2 amps to the standard radio in CX-5 and need to know the pinout of connectors at the back of the radio unit.
So here is the picture of the connectors:
https://g-a.d-cd.net/d43189u-960.jpg
can anybody share a list of signals on each of these connectors? I find a lot of information about CX-7 units and almost nothing about CX-5. Any help is appreciated!
P.S. By the way if anyone is interested in wiring out Line-Out signals (low-level) then this post might be useful for you. It's in Russian but everything is pretty obvious on the pictures there. You can take 2 or 4 special microphone cables like Belsis BW7824 (one of the cheapest) and solder one of the cable's wire to a capacitor's pad, and another wire to a solid Ground on that PCB. Of course you also need RCA connectors (female).